How do you remove the steering gear on Chevrolet Impala?

To remove the rack and pinion, start by loosening the front wheel lug nuts and raising the front of the vehicle on jackstands. Remove both front wheels and drain the power steering fluid from the reservoir. Disconnect the stabilizer links and tie-rod ends from the steering knuckles. Move the boot covering the rack and pinion input shaft and remove the coupler pinch-bolt to detach the coupler. Support the rear part of the subframe with a floor jack and remove the two rear subframe mounting bolts. Lower the subframe carefully, ensuring the rack and pinion separates without binding and detaching any wiring harnesses or hoses if necessary. Place a drain pan under the rack and pinion and disconnect the power steering pressure and return lines. Cap all openings to prevent fluid loss and contamination. Remove the rack and pinion mounting fasteners and guide the rack and pinion through the left wheel opening to remove it from the vehicle. For installation, reverse the removal steps, ensuring proper torque specifications for fasteners, guiding the rack and pinion input shaft into the intermediate shaft coupler, and reattaching any wire harnesses or brackets that were removed. Fill the power steering pump with recommended fluid, bleed the system, and check for leaks and proper operation. Finally, install the wheels, lower the vehicle, tighten the lug nuts, and have the front-end alignment checked and adjusted if necessary.

Genuine Chevrolet Impala Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Rack And Pinions found

View related parts
Chevrolet Impala Gear Assembly, Elec Dual Pinion R/Pinion Strg
Part Number: 84216769
$2312.16 MSRP: $2985.13
You Save: $672.97 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Motor, Steering Gear
- Replaces: 13376583, 22943369, 13349260, 13366875, 13286690, 23338634, 84271183
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 19330440
$302.50 MSRP: $758.54
You Save: $456.04 (61%)
ADD TO CART
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26079917, 26081812, 88964313
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Impala | IMPALA, LS, POLICE CAR | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 19330471
$311.20 MSRP: $511.57
You Save: $200.37 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: GEAR KIT,STRG (REMAN)
- Replaces: 19300502, 19259115
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Chevrolet Impala | LS, LTZ | 6 Cyl 3.5L Flex, 6 Cyl 3.9L Flex
View related parts
Chevrolet Impala Gear Kit,Steering (Partial)(Remanufacture)
Part Number: 26055468
$347.51 MSRP: $655.68
You Save: $308.17 (47%)
ADD TO CART
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Impala | LUMINA | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Gear Assembly, Elec Belt Drv Rack & Pinion Strg
Part Number: 84494624
$2017.12 MSRP: $2615.54
You Save: $598.42 (23%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Motor, Steering Gear
- Replaces: 22978626, 23459790, 23153512, 23297469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala GEAR KIT,STRG (REMAN)
Part Number: 19434140
$435.75 MSRP: $685.40
You Save: $249.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 19259876, 19356442, 19258115, 19330562
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2016 Chevrolet Impala | LS, LTZ | 6 Cyl 3.6L
View related parts
Chevrolet Impala Gear Assembly, Elec Dual Pinion R/Pinion Strg
Part Number: 84197554
$2242.77 MSRP: $2908.60
You Save: $665.83 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 23320258, 84271182, 84155470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala GEAR ASM,ELEC DUAL PINION RACK & PINION STRG
Part Number: 84216770
$2134.54 MSRP: $2755.51
You Save: $620.97 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 13366874, 13376584, 22943370, 23338635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala GEAR ASM,ELEC DUAL PINION RACK & PINION STRG (REMAN)
Part Number: 19417557
$908.49 MSRP: $1437.40
You Save: $528.91 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala GEAR ASM,ELEC DUAL PINION RACK & PINION STRG (REMAN)
Part Number: 19417556
$1072.70 MSRP: $1698.12
You Save: $625.42 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala Rack, Piston Nut Kit, Hydraulic Steering Gear
Part Number: 7817526
Product Specifications
- Other Name: RACK KIT, Steering Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | CLASSIC 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR | 8 Cyl 5.7L
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 19330429
$432.98 MSRP: $681.02
You Save: $248.04 (37%)
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 19207776, 88965490
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Impala | LS, LS POLICE CAR, LT, LT 3.5, LTZ, SS | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L, 6 Cyl 3.9L Flex
View related parts
Chevrolet Impala Gear Assembly, Elec Belt Drv Rack & Pinion Strg
Part Number: 84494619
$1749.45 MSRP: $2257.63
You Save: $508.18 (23%)
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 84377701, 84122333
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2020 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala Gear Kit,Steering (Partial)(Remanufacture)
Part Number: 26044821
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Replaces: 26003943, 26024870
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Chevrolet Impala | 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 26087039
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Impala | CLASSIC 4 DOOR, LS 4 DOOR | 8 Cyl 5.7L
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 26087025
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Replaces: 26048653
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Impala | CLASSIC 4 DOOR | 8 Cyl 5.7L
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 26087072
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Replaces: 07833143, 7833143
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Impala | CLASSIC STATION WAGON | 8 Cyl 5.7L
- 1982-1985 Chevrolet Impala | 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Impala Gear Asm,Hydraulic R/Pinion Steering
Part Number: 19356441
Product Specifications
- Other Name: GEAR ASM,HYD R/PINION STRG; Gear Assembly, Steering Gear
- Replaces: 19259877, 19258118, 19330563
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2016 Chevrolet Impala | LS, LTZ | 6 Cyl 3.6L
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 19330475
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 88955466, 88964315
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Impala | LS, LT, SS | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Gear Kit,Steering (Remanufacture)
Part Number: 26087031
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly
- Replaces: 26041012
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Impala | CLASSIC 4 DOOR, LS 4 DOOR | 8 Cyl 5.7L

| Page 1 of 2 |Next >

1-20 of 28 Results

Chevrolet Impala Rack And Pinion

The Rack And Pinion in Chevrolet Impala is one of the very important systems that takes turning force or speed of the steering wheel and moves the front wheels sideways. It normally consists of a pinion and a rack which is located inside a metal tube whereby the pinion comes into contact with the rack to enable the steering control. Manually operated rack and pinion steering was being used in certain Chevrolet Impala models in the past, while the recent models mainly incorporated power assisted systems. These hydraulic systems use pressurised fluid to increase steering comfort, directing the same to a piston that helps push the rack. Also within implementations of gears there can be straight and helical racks, but most recommend straight types of racks due to the lower wear rate and higher efficiency. Some of the most frequent problems with the Rack And Pinion include Leakage of fluid from the seals or the hoses; this causes stiff steering, and may cause additional harm if not repaired. Worn gears can also cause a lot of play in the steering wheel to develop thereby calling for replacement of the rack and pinion assembly in order to arrive at the premier handing for the vehicle.

Each OEM Chevrolet Impala Rack And Pinion we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Impala Rack And Pinion Parts Questions & Experts Answers

Gear Kit,Steering (Remanufacture)
19330471
Q: How do you remove the steering gear on Chevrolet Impala?
A: To remove the rack and pinion, start by loosening the front wheel lug nuts and raising the front of the vehicle on jackstands. Remove both front wheels and drain the power steering fluid from the reservoir. Disconnect the stabilizer links and tie-rod ends from the steering knuckles. Move the boot covering the rack and pinion input shaft and remove the coupler pinch-bolt to detach the coupler. Support the rear part of the subframe with a floor jack and remove the two rear subframe mounting bolts. Lower the subframe carefully, ensuring the rack and pinion separates without binding and detaching any wiring harnesses or hoses if necessary. Place a drain pan under the rack and pinion and disconnect the power steering pressure and return lines. Cap all openings to prevent fluid loss and contamination. Remove the rack and pinion mounting fasteners and guide the rack and pinion through the left wheel opening to remove it from the vehicle. For installation, reverse the removal steps, ensuring proper torque specifications for fasteners, guiding the rack and pinion input shaft into the intermediate shaft coupler, and reattaching any wire harnesses or brackets that were removed. Fill the Power Steering Pump with recommended fluid, bleed the system, and check for leaks and proper operation. Finally, install the wheels, lower the vehicle, tighten the lug nuts, and have the front-end alignment checked and adjusted if necessary.