Make sure this part fits

GM 1990115 Switch,Steering Column Ignition

1982-1995 GM

Customer Questions & Expert Answers (6)
GM 1990115 Switch,Steering Column Ignition
  • Part Description
    SWITCH, Ignition Switch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number1990115
    Part DescriptionSWITCH, Ignition Switch
    Other NamesIgnition Switch
    Item Dimensions6.2 x 3.8 x 2.0 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU1990115
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1990 Buick Century4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.3L DieselCUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR
    1982-1990 Buick Electra6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, COUPE 2 DOOR, ELECTRA ESTATE WAGON, LIMITED 2 DOOR, LIMITED 2 DOOR RWD, LIMITED 4 DOOR, LIMITED 4 DOOR RWD, SEDAN 4 DOOR, T-TYPE COUPE 2 DOOR, T-TYPE SEDAN 4 DOOR, ULTRA SEDAN 4 DOOR
    1982-1989 Buick Estate Wagon6 Cyl 3.8L, 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L DieselCUSTOM 2 DOOR, CUSTOM 4 DOOR, ELECTRA ESTATE WAGON, ESTATE WAGON, LIMITED 2 DOOR, LIMITED 2 DOOR COLLECT SP EDIT, LIMITED 4 DOOR, LIMITED 4 DOOR COLLECT SP EDIT
    1982-1990 Buick Lesabre6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, ELECTRA ESTATE WAGON, ESTATE WAGON, LIMITED 2 DOOR, LIMITED 2 DOOR COLLECT SP EDIT, LIMITED 4 DOOR, LIMITED 4 DOOR COLLECT SP EDIT
    1982-1987 Buick Regal6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, REGAL, STATION WAGON
    1982-1985 Buick Riviera6 Cyl 3.8L, 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L DieselCONVERTIBLE COUPE, RIVIERA, T TYPE
    1982-1989 Buick Skyhawk4 Cyl 1.8L, 4 Cyl 2.0L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 2 DOOR NOTCHBACK, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR, LIMITED WAGON, SPORT 2 DOOR, STATION WAGON, T-TYPE 2 DOOR
    1982-1991 Buick Skylark4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE
    1985-1987 Buick Somerset4 Cyl 2.5L, 6 Cyl 3.0L2 DOOR, CUSTOM, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, REGAL, REGAL LIMITED, SOMERSET, T-TYPE
    1987-1989 Cadillac Brougham8 Cyl 5.0LBROUGHAM 4 DOOR RWD
    View More
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 1990115 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the ignition switch? Posted by Customer
    A:
    Proceed with removing the ignition switch by disconnecting the two wiring leads, starting with the one farthest from the steering wheel. Remove the stud and screw securing the switch to the column, and lift off the switch, making sure to pull it up from the column due to the protruding ignition actuator rod. Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation. Place the switch on the column, guiding the actuator rod into the slider recess. Install the stud and screw, tightening them to specifications. Finally, connect the two wiring leads to the switch and reverse the procedure.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the ignition switch for the 1985 Buick Skylark? Posted by Customer
    A:
    Disconnect the two wiring leads, starting with the one farthest from the steering wheel. Remove the stud and screw securing the switch to the column, and lift off the switch, making sure to pull it up from the column due to the protruding ignition actuator rod.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Switch
    Q:
    How should you approach working with the steering column switches on the 1991 Chevrolet C1500? Posted by Customer
    A:
    On 1995 and later models, when working with the steering column switches, start by removing the steering wheel and the steering column cover. Remove the Torx-head bolt, unplug the electrical connector, and lift off the turn signal switch. Installation is the reverse of removal. If needed, center the airbag coil by removing it, turning it over, depressing the spring lock, rotating the hub as instructed, and releasing the spring lock. Finally, install the wave washer and the airbag coil, ensuring the lower wiring harness is taut to prevent damage when turning the steering wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Switch
    Q:
    What steps are involved in working with the windshield wiper/washer switch on the 1995 Chevrolet K1500? Posted by Customer
    A:
    To work with the windshield wiper/washer switch on 1988 through 1994 models, remove the steering wheel, compress the locking plate, remove the clip retaining it to the steering column, and proceed with the disassembly steps. Disconnect the handle from the windshield wiper switch and drive the pin through the switch housing to remove it. Reinstallation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Switch
    Q:
    What should you do before installing the new switch for the 1983 Pontiac Phoenix? Posted by Customer
    A:
    Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 1990115, the Right Choice

To ensure reliability, purchase GM part # 1990115 Switch,Steering Column Ignition. It is sometimes referred to as GM Ignition Switch. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Lesabre, Regal models. It fits Cadillac Brougham, Deville, Fleetwood. It also fits Chevrolet Blazer, Camaro, Chevette. This also fits GMC C2500, Suburban, Yukon.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 1990115 Switch,Steering Column Ignition. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly