My Garage
My Account
Cart
Genuine Chevrolet K1500 Ignition Switch
Starter Ignition Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Ignition Switches found
Chevrolet K1500 Switch,Ignition & Start
Part Number: 26075995$132.55 MSRP: $278.46You Save: $145.91 (53%)Ships in 1-2 Business Days
Chevrolet K1500 Ignition Switch
The Chevrolet K1500 Ignition Switch is yet a subassembly that deals with ignition switch and charging functions in the automobile. In the early time designs, the ignition switch was a mechanical sort that needed a key to rotate it, whereas, the contemporary models employ keyless systems associated with a push button initiation. It supplies power to the starter solenoid and ignition system parts, and may also perform the starter's function of drawing power to start the starter motor. Nonetheless, hotwiring is usually possible and starter switches can often be replaced quickly as these employ a plug and play principle that differs from car to car.
Each OEM Chevrolet K1500 Ignition Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet K1500 Ignition Switch Parts Questions & Experts Answers
- Q: How do you remove and reinstall Dimmer Switch,Headlight Switch,Ignition Switch,Turn Signal Switch and Wiper Switch in a Chevrolet C1500 and K1500?A: In 1988 through 1994 models, start by disconnecting the negative battery cable, and for models with a Delco Loc II anti-theft audio system, ensure the lockout feature is off. Remove the instrument cluster trim panel retaining screws, disconnect electrical connectors behind the light switch, and remove the panel. Take out the light switch retaining screws and lift the switch from the trim panel. To reinstall, ensure the grounding ring is in place. For the headlight dimmer switch, remove the steering column support bracket bolts and nuts, lower the steering column, disconnect the dimmer switch electrical connector, and remove the retaining bolts. In the case of the park/neutral switch/back-up light switch for automatic transmission. For the windshield wiper/washer switch, remove the steering wheel, compress the locking plate, remove the clip retaining it to the steering column, and proceed with the disassembly steps. Disconnect the handle from the windshield wiper switch and drive the pin through the switch housing to remove it. Reinstallation is the reverse of removal. For the ignition switch, disconnect the negative battery cable, place the ignition switch in the Lock position, and lower the steering column. Remove the ignition switch retaining screws, lift the switch out, and reconnect the actuating rod before reinstalling it. To remove the Turn Signal Switch and key lock cylinder. In 1995 and later models, start by removing the steering wheel and the steering column cover. Remove the Torx-head bolt, unplug the electrical connector, and lift off the Turn Signal Switch. Installation is the reverse of removal. If needed, center the airbag coil by removing it, turning it over, depressing the spring lock, rotating the hub as instructed, and releasing the spring lock. Finally, install the wave washer and the airbag coil, ensuring the lower wiring harness is taut to prevent damage when turning the steering wheel.
Related Chevrolet K1500 Parts
Chevrolet K1500 Instrument Panel Harness Connector
Chevrolet K1500 Light Socket
Chevrolet K1500 Turn Signal Switch
Chevrolet K1500 Forward Light Harness Connector
Chevrolet K1500 Ignition Coil
Chevrolet K1500 Engine Wiring Harness Connector
Chevrolet K1500 Speaker Connector
Chevrolet K1500 Fog Light Connector
Chevrolet K1500 Brake Light Switch
Chevrolet K1500 Rear Light Harness Connector
Chevrolet K1500 Power Seat Connector
Chevrolet K1500 Dimmer Switch