How do you remove the ignition switch?

Proceed with removing the ignition switch by disconnecting the two wiring leads, starting with the one farthest from the steering wheel. Remove the stud and screw securing the switch to the column, and lift off the switch, making sure to pull it up from the column due to the protruding ignition actuator rod. Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation. Place the switch on the column, guiding the actuator rod into the slider recess. Install the stud and screw, tightening them to specifications. Finally, connect the two wiring leads to the switch and reverse the procedure.

Genuine Buick Skylark Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ignition Switches found

View related parts
Buick Skylark Switch,Ignition & Start
Part Number: 26034119
$39.07 MSRP: $125.67
You Save: $86.60 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1998 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.3L, 4 Cyl 2.4L, 6 Cyl 3.1L
View related parts
Buick Skylark Switch,Ignition & Start
Part Number: 1990116
Product Specifications
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Buick Skylark Switch,Steering Column Ignition
Part Number: 1990115
Product Specifications
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Buick Skylark Switch,Ignition
Part Number: 26036700
Product Specifications
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.3L, 6 Cyl 3.3L
View related parts
Buick Skylark Switch,Steering Column Ignition Lock
Part Number: 7843451
Product Specifications
- Other Name: SWITCH, Ignition Switch; Ignition Lock Cylinder, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Buick Skylark Switch,Ignition Key Alarm
Part Number: 26022717
Product Specifications
- Other Name: SWITCH, Ignition Switch Warning, Lock, Headlamp,Theft Deterrent or Frt/Rear/Side Object
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Buick Skylark Switch Assembly, Ignition Key Warning Alarm
Part Number: 7804414
Product Specifications
- Other Name: SWITCH, Ignition Switch Warning, Lock, Headlamp,Theft Deterrent or Frt/Rear/Side Object
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L

Buick Skylark Ignition Switch

The Ignition Switch of Buick Skylark vehicles directly plays a significant role in the ignition and charging system of the vehicle; this is because its primary function is to start the engine and keep the car running. This switch including the starter switch control some electrical operations within the automotive including the starter solenoid and some comprehension of ignition. Whereas early Bural Skylark models incorporated a mechanical key for starting the car's engine, the modern models have incorporated keyless systems that require a transponder signal to start the car together with an immobiliser as a security measure. Nevertheless, ignition switches today are not very complex and can be replaced and are interchangeable plugs that apply to each Buick Skylark vehicle.

Each OEM Buick Skylark Ignition Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Skylark Ignition Switch Parts Questions & Experts Answers

Switch,Steering Column Ignition Lock
7843451
Q: How do you remove the ignition switch?
A: Proceed with removing the ignition switch by disconnecting the two wiring leads, starting with the one farthest from the steering wheel. Remove the stud and screw securing the switch to the column, and lift off the switch, making sure to pull it up from the column due to the protruding ignition actuator rod. Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation. Place the switch on the column, guiding the actuator rod into the slider recess. Install the stud and screw, tightening them to specifications. Finally, connect the two wiring leads to the switch and reverse the procedure.