Contact Us: Live Chat or 1-888-737-9766
×
Search Bar
Search by Part Number, Part Name, Description
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Chevrolet 1990115 Switch,Steering Column Ignition

1982-1995 Chevrolet

GM 1990115 Switch,Steering Column Ignition
GM 1990115 Switch,Steering Column Ignition
GM 1990115 Switch,Steering Column Ignition
GM 1990115 Switch,Steering Column Ignition
GM 1990115 Switch,Steering Column Ignition
GM 1990115 Switch,Steering Column Ignition
  • Part Description
    SWITCH, Ignition Switch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers

Related Parts

Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number1990115
    Part DescriptionSWITCH, Ignition Switch
    Other NamesIgnition Switch
    Item Dimensions6.1 x 3.7 x 2.1 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU1990115
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1985-1995 Chevrolet Astro4 Cyl 2.5L, 6 Cyl 4.3LVAN ASTRO
    1987-1990 Chevrolet Beretta4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ
    1985-1994 Chevrolet Blazer6 Cyl 2.8L, 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 6.5L Diesel1/2 TON
    1985-1986 Chevrolet C106 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L DieselREGULAR CAB LONG BOX, REGULAR CAB STANDARD BOX
    1988-1994 Chevrolet C15006 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 6.5L Diesel, 8 Cyl 7.4LC1500 EXTENDED CAB LONG BOX, C1500 EXTENDED CAB STANDARD BOX, C1500 REGULAR CAB LONG BOX, C1500 REGULAR CAB STANDARD BOX
    1985-1986 Chevrolet C206 Cyl 4.3L, 6 Cyl 4.8L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 7.4LCREW CAB, REGULAR CAB
    1988-1994 Chevrolet C25006 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 6.5L Diesel, 8 Cyl 7.4LC2500 EXTENDED CAB LONG BOX, C2500 EXTENDED CAB STANDARD BOX, C2500 REGULAR CAB
    1985-1986 Chevrolet C306 Cyl 4.8L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 7.4LCAB CHASSIS 135.5, CAB CHASSIS 159.9, CREW CAB, REGULAR CAB
    1988-1994 Chevrolet C35008 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 6.5L Diesel, 8 Cyl 7.4LC3500 CAB CHASSIS 135.5, C3500 CAB CHASSIS 159.9, C3500 CAB CHASSIS 183.5, C3500 CREW CAB LONG WHEELBASE, C3500 EXTENDED CAB, C3500 REGULAR CAB
    1983-1986 Chevrolet Cadet4 Cyl 2.0L, 6 Cyl 2.8L2 DOOR, 2 DOOR HATCHBACK, 2 DOOR NOTCHBACK, 4 DOOR, CONVERTIBLE, CS 2 DOOR HATCHBACK, CS 4 DOOR, CS STATION WAGON, RS 2 DOOR HATCHBACK, RS 2 DOOR NOTCHBACK, RS 4 DOOR, RS CONVERTIBLE, RS STATION WAGON, STATION WAGON, Z24 2 DOOR NOTCHBACK, Z24 2 DOOR PLAINBACK HATCHBACK
    View More

Customer Questions & Answers

Q:
I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 1990115 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How do you remove the ignition switch for the 1985 Buick Skylark? Posted by Customer
A:
Disconnect the two wiring leads, starting with the one farthest from the steering wheel. Remove the stud and screw securing the switch to the column, and lift off the switch, making sure to pull it up from the column due to the protruding ignition actuator rod.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
How should you approach working with the steering column switches on the 1991 Chevrolet C1500? Posted by Customer
A:
On 1995 and later models, when working with the steering column switches, start by removing the steering wheel and the steering column cover. Remove the Torx-head bolt, unplug the electrical connector, and lift off the turn signal switch. Installation is the reverse of removal. If needed, center the airbag coil by removing it, turning it over, depressing the spring lock, rotating the hub as instructed, and releasing the spring lock. Finally, install the wave washer and the airbag coil, ensuring the lower wiring harness is taut to prevent damage when turning the steering wheel.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
What steps are involved in working with the windshield wiper/washer switch on the 1995 Chevrolet K1500? Posted by Customer
A:
To work with the windshield wiper/washer switch on 1988 through 1994 models, remove the steering wheel, compress the locking plate, remove the clip retaining it to the steering column, and proceed with the disassembly steps. Disconnect the handle from the windshield wiper switch and drive the pin through the switch housing to remove it. Reinstallation is the reverse of removal.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
What should you do before installing the new switch for the 1983 Pontiac Phoenix? Posted by Customer
A:
Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
How do you remove the ignition switch? Posted by Customer
A:
Proceed with removing the ignition switch by disconnecting the two wiring leads, starting with the one farthest from the steering wheel. Remove the stud and screw securing the switch to the column, and lift off the switch, making sure to pull it up from the column due to the protruding ignition actuator rod. Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation. Place the switch on the column, guiding the actuator rod into the slider recess. Install the stud and screw, tightening them to specifications. Finally, connect the two wiring leads to the switch and reverse the procedure.
Posted by GMPartsGiant Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 1990115, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 1990115 Switch,Steering Column Ignition. It is sometimes referred to as Chevrolet Ignition Switch. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Blazer, Camaro, Chevette models.

Affordable, reliable and built to last, GM part # 1990115 Switch,Steering Column Ignition stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly