How to relieve fuel system pressure and replace the fuel filter in a fuel-injected Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

To begin, relieve the fuel system pressure. Fuel injected models have a stainless steel in-line fuel filter, which is located at the left rear of the engine on TBI engines and attached to the cylinder head. On MPFI engines, the fuel filter is connected to the frame rail or rear crossmember near the fuel tank. With the engine cold, place a container or rags under the filter. Remove the lines from the ends of the filter, then take out the attaching bolts and separate the filter. Install the new filter, ensuring it is facing the correct direction. Finally, reverse the steps for installation.

How to replace the Fuel Filter for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

In order to separate the fuel line from the carburetor, loosen this connection at the fuel inlet nut. Once you have taken out the fuel inlet nut from your carb, remove this spring and filter. The hole end of the filter should face towards the fuel inlet nut when returning back together with the spring and filter. A fresh gasket must be put on its carb-fuel-inlet-nut before screwing it in place. Lastly, position a wrench with respect to an appropriate torque for a fuel line and lightening connector.

Genuine Buick Skylark Fuel Filter

Gas Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Filters found

View related parts
Buick Skylark Filter,Fuel
Part Number: 25055002
$12.60 MSRP: $18.75
You Save: $6.15 (33%)
ADD TO CART
Product Specifications
- Other Name: FILTER, Engine Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Buick Skylark Strainer,Fuel Sender Fuel
Part Number: 25055455
Product Specifications
- Other Name: STRAINER, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Buick Skylark Strainer,Fuel Sender Fuel
Part Number: 5651702
Product Specifications
- Other Name: FILTER, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Buick Skylark Filter Kit,Fuel
Part Number: 25171792
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25055052, 25121915, 25121792
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Buick Skylark Filter,Fuel
Part Number: 25121293
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25121942
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1998 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.3L, 4 Cyl 2.4L, 6 Cyl 3.1L, 6 Cyl 3.3L
View related parts
Buick Skylark FILTER ASM,FUEL
Part Number: 19332546
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.5L, 6 Cyl 3.0L
View related parts
Buick Skylark Filter Pkg, Fuel
Part Number: 25055083
$10.83 MSRP: $19.42
You Save: $8.59 (45%)
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L

Buick Skylark Fuel Filter

Buick Skylark Fuel Filter is an assembly created to function as a shield to the engine so as to prevent it from encountering various fuel borne materials such as dirt, rust and other debris. With these destructive particles, the fuel filter plays a crucial role in avoiding wear and damage to other peripherals, including fuel pumps and injectors, and thus a better performance and efficiency of a car engine. As for the fuel filter, it should be as well serviced as possible since the clogging often limits the fuel flow as well as causes the poor engine rates. The common types include inline fuel filters and canister fuel filters for specific vehicles and fuel kinds, in order to reach the engine in its clean form to enhance its performance, because contaminated fuel ruins the engine. In summary, fuel filter acts as very an essential part of maintaining the longevity and efficiency of the Buick Skylark car's engine.

Each OEM Buick Skylark Fuel Filter we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Skylark Fuel Filter Parts Questions & Experts Answers

Filter Kit,Fuel
25171792
Q: How to relieve fuel system pressure and replace the fuel filter in a fuel-injected Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?
A: To begin, relieve the fuel system pressure. Fuel injected models have a stainless steel in-line fuel filter, which is located at the left rear of the engine on TBI engines and attached to the cylinder head. On MPFI engines, the fuel filter is connected to the frame rail or rear crossmember near the fuel tank. With the engine cold, place a container or rags under the filter. Remove the lines from the ends of the filter, then take out the attaching bolts and separate the filter. Install the new filter, ensuring it is facing the correct direction. Finally, reverse the steps for installation.
Filter Pkg, Fuel
25055083
Q: How to replace the Fuel Filter for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?
A: In order to separate the fuel line from the carburetor, loosen this connection at the fuel inlet nut. Once you have taken out the fuel inlet nut from your carb, remove this spring and filter. The hole end of the filter should face towards the fuel inlet nut when returning back together with the spring and filter. A fresh gasket must be put on its carb-fuel-inlet-nut before screwing it in place. Lastly, position a wrench with respect to an appropriate torque for a fuel line and lightening connector.