Make sure this part fits

Oldsmobile 88894282 Piston Asm,(W/ Pinion)(0.50 Mm Outside)

1996-2001 Oldsmobile Bravada

Customer Questions & Expert Answers (9)
GM 88894282 Piston Asm,(W/ Pinion)(0.50 Mm Outside)
  • Part Description
    PISTON KIT, Engine Piston
  • Replaces
    12524224
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number88894282
    Part DescriptionPISTON KIT, Engine Piston
    Item Dimensions4.9 x 4.4 x 4.3 inches
    Item Weight1.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12524224
    ManufacturerGeneral Motors
    SKU88894282
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1996-2001 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    Do these parts fit my vehicle? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 88894282 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What tool can be used to facilitate the removal of the upper bearing insert in the connecting rod for the 1992 Chevrolet C1500? Posted by Customer
    A:
    Use a wooden hammer handle to push on the upper bearing insert in the connecting rod. If resistance is felt, double-check to make sure all of the ridge was removed from the cylinder.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How should the new upper bearing half be placed within the connecting rod for the 1993 Chevrolet C1500? Posted by Customer
    A:
    Clean the backside of the new upper bearing half and carefully place it within the connecting rod, ensuring the tab fits securely into the recess in the rod.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done during the inspection of connecting rods for the 1995 Chevrolet C1500? Posted by Customer
    A:
    Rod caps should be temporarily removed, bearing surfaces should be inspected, and old bearings should be replaced before tightening the nuts finger-tight.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What does corrosion with small pits on the piston indicate for the 1989 Chevrolet K1500? Posted by Customer
    A:
    It may indicate coolant leakage and should be resolved.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What tool can be used to facilitate the removal of the upper bearing insert in the connecting rod for the 1991 Chevrolet K1500? Posted by Customer
    A:
    Use a wooden hammer handle to push on the upper bearing insert in the connecting rod. If resistance is felt, double-check to make sure all of the ridge was removed from the cylinder.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What steps should be taken to secure the rod cap for the 1995 Chevrolet K1500? Posted by Customer
    A:
    Push the piston into the cylinder to expose the face of the bearing insert in the connecting rod, then slide the connecting rod back onto the journal, remove the protective hoses from the rod cap bolts, and secure the rod cap, tightening the nuts to the specified torque in three steps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done after installing all piston/connecting rod assemblies for the 2012 Chevrolet Silverado? Posted by Customer
    A:
    After installing all piston/connecting rod assemblies, you should rotate the crankshaft by hand to check for any binding. It is also important to check the connecting rod endplay for correctness. If necessary, the rods may need to be taken for resizing if new components were installed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done after installing all piston/connecting rod assemblies for the 2011 GMC Sierra? Posted by Customer
    A:
    After installing all piston/connecting rod assemblies, you should rotate the crankshaft by hand to check for any binding. It is also important to check the connecting rod endplay for correctness. If necessary, the rods may need to be taken for resizing if new components were installed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 88894282, the Right Choice

To ensure reliability, purchase GM part # 88894282 Piston Asm,(W/ Pinion)(0.50 Mm Outside). It is sometimes referred to as Oldsmobile Piston. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Bravada models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 88894282 Piston Asm,(W/ Pinion)(0.50 Mm Outside). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly