Make sure this part fits

Buick 84243380 Lift Gate Latch Assembly

2008-2017 Buick Enclave

Customer Questions & Expert Answers (21)
GM 84243380 Lift Gate Latch Assembly
  • Part Description
    Latch Assembly, Lift Gate
  • Replaces
    13503467, 13502698, 13581405, 13501872, 15779874, 15839037
  • Manufacturer
    General Motors
Make sure this part fits
$264.60 MSRP: $393.83
You Save: $129.23 (33%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number84243380
    Part DescriptionLatch Assembly, Lift Gate
    Other NamesActuator, Latch, Lock, Lower Cover
    Item Dimensions4.8 x 4.8 x 11.4 inches
    Item Weight2.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces13503467, 13502698, 13581405, 13501872, 15779874, 15839037
    ManufacturerGeneral Motors
    SKU84243380
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2017 Buick Enclave6 Cyl 3.6LSPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD
  • Customer Questions & Expert Answers

    Q:
    Do these parts fit my vehicle? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 84243380 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How often should the hinges and latch assemblies on the doors, hood,Liftgate and trunk be lubricated on Chevrolet Equinox and GMC Terrain? Posted by Customer
    A:
    After every 3000 miles or at least once in three months, you should add some light oil or lock lubricant on the hinges and latch assemblies of your doors, hood, trunk or liftgate. To prevent wear and tear and ensure smooth movement, lightly apply grease to the door latch strikers. Use a graphited lubricant spray to grease the locks of car doors as well as trunks (or lift gates).
    Posted by GMPartsGiant Specialist
    Q:
    How many key fobs can be programmed to one2012 Buick Enclave, and what should be considered during reprogramming? Posted by Customer
    A:
    Up to eight key fobs can be programmed to one car, and all fobs must be present during the reprogramming process.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    How do you remove the outside handle for the 2013 Buick Enclave? Posted by Customer
    A:
    To remove the outside handle, open the door and remove the small access cover. Loosen the retainer but do not remove it. Pull the door handle out halfway and remove the small cover, then remove the handle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is required to program replacement transmitters for the keyless entry system for the 2015 Chevrolet Equinox? Posted by Customer
    A:
    Programming replacement transmitters for the keyless entry system requires a specialized scan tool. Therefore, you should take the vehicle and transmitters to a dealer service department or qualified repair shop for programming.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    How does lubricating the door latch strikers help for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    It reduces wear and ensures free movement.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    How can the inside door handle be removed for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    The inside door handle can be removed by removing the door trim panel and plastic watershield, then removing the mounting screws and detaching the handle assembly from the door. Finally, disconnect the rods and electrical connector, and remove the assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you install the door latch for the 2017 GMC Acadia? Posted by Customer
    A:
    For installation, simply reverse the removal process.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should you do after removing the handle mounting bolts for the 2012 Chevrolet Suburban? Posted by Customer
    A:
    Carefully pry or pull off the handle trim cover.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What are the components of 2009 Chevrolet Suburban door that can be removed and installed? Posted by Customer
    A:
    The components that can be removed and installed are the latch, lock cylinder, outside handle, inside release handle, and latch strikers.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How many key fobs can be programmed to one car, and what should be considered during reprogramming for the 2013 GMC Acadia? Posted by Customer
    A:
    Up to eight key fobs can be programmed to one car, and all fobs must be present during the reprogramming process.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What should you do if there is a lock cylinder for the 2012 Chevrolet Tahoe? Posted by Customer
    A:
    If equipped, detach any linkage to the lock cylinder.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    How is an inoperative solenoid diagnosed and repaired in the power door lock system for the 2014 Chevrolet Traverse? Posted by Customer
    A:
    In case of an inoperative solenoid, you should test for voltage and ground, check for breaks in the wiring, and replace the solenoid if necessary.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    How do you install the outside handle of the 2015 Chevrolet Traverse? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the lock cylinder from a door handle for the 2012 Chevrolet Tahoe? Posted by Customer
    A:
    To remove the lock cylinder from a door handle, pry off the retaining clip and withdraw it from the door handle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the inside release handle from a door for the 2013 GMC Yukon? Posted by Customer
    A:
    To remove the inside release handle from a door, release its cable and remove the mounting fasteners.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How can the outside handle be removed for the 2016 GMC Terrain? Posted by Customer
    A:
    The outside handle can be removed by either removing the bolt cover and bolt, or by unclipping the lock trim cover and using a hooked tool to hold the bellcrank lever in the partially opened position while removing the handle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should you do after detaching the control rods for the 2010 GMC Yukon? Posted by Customer
    A:
    Remove the latch mounting bolts and withdraw the latch from the end of the tailgate.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    How should the door and trunk locks be lubricated for the 2016 GMC Terrain? Posted by Customer
    A:
    They should be lubricated with spray-on graphite lubricant.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done to the door latch strikers for the 2013 GMC Terrain? Posted by Customer
    A:
    They should be lubricated with a thin coat of grease.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    How should communication issues with the power door lock system be addressed for the 2010 GMC Terrain? Posted by Customer
    A:
    If there are communication issues with the power door lock system, it is recommended to consult a dealer or qualified shop with the proper scan tool to retrieve trouble codes from the BCM for diagnosis.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Lock
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 84243380, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 84243380 Lift Gate Latch Assembly. It is sometimes referred to as Buick Door Lock, Buick Door Lock Actuator, Buick Tailgate Latch, Buick Tailgate Lock, Buick Trunk Latch, Buick Door Latch Assembly. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Buick Enclave models.

Affordable, reliable and built to last, GM part # 84243380 Lift Gate Latch Assembly stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly