Other Name: Latch Asm,Front Side Door ; Latch, Door Lock; Latch, Lock
Position: Front
Replaces: 25804713, 25893179, 15125189, 25973129
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2008 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD | 6 Cyl 3.6L
GMC Acadia Door Latch Assembly
The Door Latch Assembly in GMC Acadia cars play a vital part in the locking and unlocking of the doors and thus enhancing the security of the car. This assembly can be fitted with various locking systems which could either be automatic or manual and the system can work with either a central or individual locking system. The Door Latch Assembly is built to last but may require replacement due to typical problems with the outer door handles not working, a stuck latch, or problems with the door lock button. Such factors thus emphasize on the significance of the Door Latch Assembly in the vehicle to provide safety and convenience.
Each OEM GMC Acadia Door Latch Assembly we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Acadia Door Latch Assembly Parts Questions & Experts Answers
Q: How to remove the Door Handle,Door Latch Assembly and Door Lock Cylinder on GMC Acadia?
A: To remove the door latch, start by removing the door trim panel and water shield. Then, remove the retainers for the cable and disconnect the electrical connector from the latch. Detach the rods from the latch and remove the latch mounting fasteners. For installation, simply reverse the removal process. To remove the outside handle, open the door and remove the small access cover. Loosen the retainer but do not remove it. Pull the door handle out halfway and remove the small cover, then remove the handle. Installation is the reverse of removal. To remove the door lock cylinder, remove the door trim panel and plastic water shield. Remove the door handle and disconnect the latch rod from the lock cylinder and handle rod. Remove the fastener securing the door handle housing and release the retainer from the rear of the door lock cylinder. Push the lockout of the housing. Installation is the reverse of removal.