Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-1999 Chevrolet Suburban | 1/2 TON, 3/4 TON | 8 Cyl 5.7L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L
| Page 1 of 6 |Next >
1-20 of 114 Results
Chevrolet Suburban Door Latch Assembly
Chevrolet Suburban Coordinator Door Latch Assembly is mainly responsible for latching of the vehicle doors and it means that the door cannot be opened from outside by other people. This assembly can be locked using a number of locks, these can be automatic or manual and can be coupled with side or central lock. It is worth to note that there have been several versions of Door Latch Assembly used in the Suburban models, with intent of being built to last and as simple to operate as possible. However, these assemblies may need replacement because of reasons like malfunctioning of outer door handles, a sticking mechanism, or problems with the 'locking' button of the door. In conclusion, the Door Latch Assembly plays an important role in the performance of the car doors ensuring that they are locked and unlocked as required in the safety of the vehicle.
Each OEM Chevrolet Suburban Door Latch Assembly we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Suburban Door Latch Assembly Parts Questions & Experts Answers
Q: How to remove and install Door Handle, Door Latch Assembly,Door Lock Cylinder on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove and install various components of a vehicle's door, such as the latch, lock cylinder, outside handle, inside release handle, and latch strikers, certain steps must be followed. For standard doors, the latch rods must be detached from the lock cylinder, inside lock, and outside handle before removing the three Torx-head mounting screws and the latch from the door. Access doors use two latches, one at the top and one at the bottom, and require the removal of the trim around the latch to access it for removal or adjustment. The lock cylinder can be removed by prying off the retaining clip and withdrawing it from the door handle, while the outside handle requires the removal of the hole plug and bolts before detaching the rods for the lock cylinder and handle itself. The inside release handle must have its cable released and mounting fasteners removed, and latch strikers can be adjusted by loosening the bolts and moving the striker slightly before retightening and checking for proper latch operation.