Genuine Saturn LS1 Fuel Filter

Gas Filter
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Filter found

  • Saturn LS1 Fuel Filter - 25319686
    View related parts
    Product Specifications
    • Other Name: FILTER, Engine Fuel Filter; Fuel Filter
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L

Saturn LS1 Fuel Filter

In the Saturn LS1 vehicular model, the Fuel Filter plays a very vital role of protecting the engine from contaminants such as dirt, rust and debris in the fuel. Filtration of the fuel is crucial for the engines health and to avoid damaging of fuel consuming components such as the fuel pumps and the fuel injectors. In-line filters can be Fresher or gauge, and are normally used in between the fuel tank and the Saturn LS1 engine and may consist of reusable cartridges or spin-on types. Depending on certain specifics of a particular Saturn LS1 model, various Fuel Filters may be installed and while some of them should be easily serviceable, others comprise shut-off valves that help to reduce the degree of fuel loss during servicing of the assembly. It is required to replace the Fuel Filter after the certain period of time since clogging of the filter can provoke the reduction of fuel supply and, thus, the deterioration of the engine efficiency.

Each OEM Saturn LS1 Fuel Filter we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn LS1 Fuel Filter Parts Questions & Experts Answers

  • Q: Where is the fuel filter located and How to replace it on Saturn LS1?
    A: This is situated under the car on the right-hand side ahead of the fuel tank. First of all unfload the fuel system pressure. If necessary, place the car on a rise and put it on jackstands securely if they will be present during the work. Check the condition of the fittings mounted at the ends of the filter and if the dust-layer is thicker than a thin layer then clean the fittings in question. Remove the fuel line at the fuel filter, a screwdriver is used to push the clip back and at the same time squeezing the two tabs in the middle of the line and releasing the line on the other side and the lines are removed one at a time expecting fuel spillage. Upon disconnecting these lines, examine the connectors for signs of wearing, bending or warping; if indeed they suffered any wear while being disconnected, new connectors have to be obtained the next time you reconnect these lines to a new filter. Pull the fuel filter out of the mounting clamp while observing the orientation of the filter. To replace the new filter, insert it in the same direction and fit the hoes to the filter until they are tightly resting against the collar in the fitting, fix the clips tightly in order to avoid any possibilities resulting in backing off hoses and cause a fire. Last but not the least, turn the key and look for the fuel streaks on the ground.

Related Saturn LS1 Parts