×
Contact Us Live Chat or 1-888-737-9766
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center

Genuine Saturn LS1 Ignition Switch

Starter Ignition Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Switch found

  • Saturn LS1 Ignition Switch - 26087207
    View related parts

    Saturn LS1 Switch Asm,Ignition & Start

    Part Number: 26087207
    Product Specifications
    • Other Name: SWITCH, Ignition Switch; Ignition Switch
    • Replaces: 26087236, 26062239
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L

Saturn LS1 Ignition Switch

The Saturn LS1 use an Ignition Switch which is otherwise called a starter switch and this is very important in controlling the ignition and charging system of the ve This involves using key, button, or remote to rotate the Ignition Switch which signals the vehicle's computer to initiate necessary circuits so that the engine will start and the car termed Saturn LS1 will function. This has evolved with change in Ignition Switch designs of the Saturn LS1 over the years from mechanical key to even touchless key-less push buttons. While these newer systems are less dependent on the over-the-air signal, they still need a transponder signal to trigger them, making them more secure. At the same time, as the consequence of the crash investigation, the Saturn LS1 ignitions switch plays a crucial role in powering the starter solenoid and other sections connected to the ignition but remains easily repairable following a conventional plug-and-play fashion system of the Saturn LS1.

Each OEM Saturn LS1 Ignition Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn LS1 Ignition Switch Parts Questions & Experts Answers

  • Saturn LS1 Ignition Switch - 26087207 Switch Asm,Ignition & Start Switch Asm,Ignition & Start
    26087207
    Q: How do you disconnect and remove the ignition switch and lock cylinder from the steering column on Saturn LS1?
    A: Disconnect the cable from the negative terminal of the battery. Remove the steering column covers and disconnect the two electrical connectors from the ignition switch. To remove the ignition switch from the steering column, disconnect the two electrical connectors and remove the two reverse-Torx head screws, followed by the two switch mounting screws to take out the ignition switch. Installation is the reverse of removal, and the battery should be reconnected. Next, remove the lock cylinder trim bezel from the lower steering column cover by carefully prying it off with a small screwdriver, then remove the steering column covers again. Take out the windshield wiper/washer switch. Insert the ignition key into the ignition lock cylinder, rotate it to the START position, and insert a 1/8-inch awl or punch through the hole in the top of the casting that houses the ignition lock cylinder to depress the locking button, allowing you to pull out the cylinder. Before installing the ignition lock cylinder, ensure that the actuator blade inside the ignition lock cylinder bore is in the RUN position; if it has been moved, rotate it to the RUN position with needle-nose pliers, as the ignition lock cylinder will not seat correctly otherwise. Installation is otherwise the reverse of removal, and the battery should be reconnected. Finally, verify that the ignition switch operates correctly in the OFF, ACC, RUN, and START positions.

Related Saturn LS1 Parts

Browse by Year

+
2000 Ignition Switch