My Garage
My Account
Cart
Genuine Oldsmobile Omega Fuel Filter
Gas Filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Fuel Filters found
Oldsmobile Omega Strainer,Fuel Sender Fuel
Part Number: 25055455$5.45 MSRP: $16.33You Save: $10.88 (67%)
Oldsmobile Omega Fuel Filter Parts Questions & Experts Answers
- Q: How to relieve fuel system pressure and replace the fuel filter in a fuel-injected Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?A: To begin, relieve the fuel system pressure. Fuel injected models have a stainless steel in-line fuel filter, which is located at the left rear of the engine on TBI engines and attached to the cylinder head. On MPFI engines, the fuel filter is connected to the frame rail or rear crossmember near the fuel tank. With the engine cold, place a container or rags under the filter. Remove the lines from the ends of the filter, then take out the attaching bolts and separate the filter. Install the new filter, ensuring it is facing the correct direction. Finally, reverse the steps for installation.
- Q: How to replace the Fuel Filter for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?A: In order to separate the fuel line from the carburetor, loosen this connection at the fuel inlet nut. Once you have taken out the fuel inlet nut from your carb, remove this spring and filter. The hole end of the filter should face towards the fuel inlet nut when returning back together with the spring and filter. A fresh gasket must be put on its carb-fuel-inlet-nut before screwing it in place. Lastly, position a wrench with respect to an appropriate torque for a fuel line and lightening connector.
Related Oldsmobile Omega Parts
Oldsmobile Omega Ignition Switch
Oldsmobile Omega Fuel Pump
Oldsmobile Omega Spark Plug
Oldsmobile Omega Oil Filter
Oldsmobile Omega Air Filter
Oldsmobile Omega Ignition Coil