How do you remove the vacuum pump on Chevrolet Express and GMC Savana?

Disconnect the negative battery terminal. Remove the drive belts and vacuum pump belt. Disconnect the vacuum line quick-connect fitting at the side of the vacuum pump. Remove the bolts securing the vacuum pump to the engine block. Remove the vacuum pump and the gasket. Installation is the reverse of removal. Install the mounting bolts finger tight, then tighten them to the proper torque specifications.

Genuine Chevrolet Express Vacuum Pump

Vacuum Pressure Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vacuum Pumps found

View related parts
Chevrolet Express Pump,Vacuum
Part Number: 89017558
$252.99 MSRP: $455.83
You Save: $202.84 (45%)
Product Specifications
- Other Name: PUMP, Engine Vacuum Pump; Vacuum Pump
- Replaces: 12556549, 26039593, 97288505, 12562793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 8 Cyl 6.5L Diesel
View related parts
Chevrolet Express Pump Assembly, Heater & A/C Control Vacuum
Part Number: 23490194
$166.46 MSRP: $299.92
You Save: $133.46 (45%)
Product Specifications
- Other Name: PUMP, A/C Vacuum Control
- Replaces: 15106862, 25847999
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2016 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA | 8 Cyl 6.6L Diesel

Chevrolet Express Vacuum Pump Parts Questions & Experts Answers

Pump Assembly, Heater & A/C Control Vacuum
23490194
Q: How do you remove the vacuum pump on Chevrolet Express and GMC Savana?
A: Disconnect the negative battery terminal. Remove the drive belts and vacuum pump belt. Disconnect the vacuum line quick-connect fitting at the side of the vacuum pump. Remove the bolts securing the vacuum pump to the engine block. Remove the vacuum pump and the gasket. Installation is the reverse of removal. Install the mounting bolts finger tight, then tighten them to the proper torque specifications.