Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
Replaces: 12623094
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2018-2021 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 6 Cyl 4.3L
Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2010 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA | 8 Cyl 6.6L Diesel
Other Name: SENSOR, Distributor (also Knock Sensor); Knock Sensor
Replaces: 21024729
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2005 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON PASSENGER, 1/2 TON CARGO EXPRESS, 1/2 TON PASSENGER EXPRESS, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 6 Cyl 4.3L
Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
Replaces: 98079567
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2010-2016 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA | 8 Cyl 6.6L Diesel
Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Position Sensor
Replaces: 10154687
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2002 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 8 Cyl 6.5L Diesel
A: First, you should disconnect the cable from your negative battery terminal. Disconnect CKP sensor electrical connector and remove sensor mounting bolt. A small amount of engine oil should be applied to the O-ring before installing the CKP sensor which should then be tightened properly with the mounting bold. Connect Ckp sensor electrical connector to main engine harness after removing starter motor in 2018 and later 4.3L V6, 4.8L, 5.3L and 6.0L V8 engines. Installation is reverse of removal so ensure that camshaft position (CMP) senor mounting bolt is tightened securely. The person doing this work must also restart the engine after completing this process in order to determine if Malfunction Indicator Light (MIL) illuminates during startup; this may be a sign that there's some Diagnostic Trouble Code (OTC) related to CKP system variation not learned error code set within PCM by vehicle manufacturer. Another option is to have a dealer technician perform the necessary procedure to relearn the variation between CKP and CMP sensors as well as clear OTC from PCM's memory while allowing someone else who works at an authorized repair station to fix any driveability problems you encounter by performing CKP system variation learn procedure plus deleting OTCs stored on-PCM at such location.