Q: How to disconnect and install the MAF/IAT sensor for Chevrolet Corvette?
A: For 5.7L (LS1 and LS6) and 6.0L (LS2) engines, remove the electrical connector from the MAF/IMT sensor. Break loose the clamps on the intake air ducts and those of MAF sensors-to-air filter housings. The intake air duct is separated from the throttle body as well as MAF/IMT sensor, after which the latter is removed from air filter housing. Reinstall everything as it was during disassembly. Tighten them firmly. It should also be noted that on supercharged 6.2L (LS9) engines, the Intake Manifold Temperature Sensor is a separate sensor mounted on the charge air cooler; while for other models, the Mass Air Flow (MAF) sensor is located on the side of the intake air duct portion of the air filter housing. Remove electrical connector to MAF/IMT sensor. Remove fasteners by unscrewing them, then detach this device from your car's air intake duct. Reinstallation follows removal steps in reverse.