How do I remove and replace the CKP sensor in a Chevrolet Corvette?

Disconnect the cable from the negative battery terminal. Raise the front of the vehicle and support it securely on jackstands. Remove the starter motor. Disconnect the electrical connector from the CKP sensor, which is on the right rear of the engine block. Remove the CKP sensor mounting bolt and remove the CKP sensor. Remove and inspect the sensor O-ring. If it's cut, torn or otherwise deteriorated, replace it. Lubricate the sensor O-ring with clean engine oil. Installation is otherwise the reverse of removal.

Genuine Chevrolet Corvette Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Crankshaft Position Sensors found

View related parts
Chevrolet Corvette Sensor Assembly, Cr/Shf Posn
Part Number: 12703627
$48.07 MSRP: $99.82
You Save: $51.75 (52%)
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 12585546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Sensor Assembly, Crankshaft Position
Part Number: 12669636
$26.75 MSRP: $50.48
You Save: $23.73 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 12623094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2022 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, CORVETTE STINGRAY CONVERTIBLE, CORVETTE STINGRAY COUPE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Sensor,Crankshaft Position
Part Number: 12560228
$63.78 MSRP: $114.40
You Save: $50.62 (45%)
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Corvette | 2 DOOR, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L, 8 Cyl 6.0L
View related parts
Chevrolet Corvette Sensor Assembly, Crankshaft Position <Use 12F 37
Part Number: 12601389
$34.40 MSRP: $61.70
You Save: $27.30 (45%)
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Corvette | 2 DOOR SPECIAL | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Sensor Asm,Crankshaft Position
Part Number: 19170837
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 10456237, 10456534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Sensor Assembly, Crankshaft Position
Part Number: 10457661
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1995 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L

Chevrolet Corvette Crankshaft Position Sensor Parts Questions & Experts Answers

Sensor,Crankshaft Position
12560228
Q: How do I remove and replace the CKP sensor in a Chevrolet Corvette?
A: Disconnect the cable from the negative battery terminal. Raise the front of the vehicle and support it securely on jackstands. Remove the starter motor. Disconnect the electrical connector from the CKP sensor, which is on the right rear of the engine block. Remove the CKP sensor mounting bolt and remove the CKP sensor. Remove and inspect the sensor O-ring. If it's cut, torn or otherwise deteriorated, replace it. Lubricate the sensor O-ring with clean engine oil. Installation is otherwise the reverse of removal.