Genuine Buick Enclave Vacuum Pump

Vacuum Pressure Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vacuum Pump found

  • Buick Enclave Vacuum Pump - 22819443
    View related parts

    Buick Enclave Pump Assembly, Power Brake Booster Auxiliary

    Part Number: 22819443
    $155.08 MSRP: $307.67
    You Save: $152.59 (50%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: PUMP, Vacuum Power Brake Pump; Auxiliary Pump
    • Replaced by: 86517948
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2009-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Buick Enclave Vacuum Pump

Vacuum Pump in Buick Enclave cars is an important element which helps the engine in evacuating the brake booster to supply vacuum for lots of themes that include turbocharger and exhaust gas recirculation valves. These pumps can be mechanical and electric, where by mechanical are draw by the engine while electric are more effective. It is used for controlling emission and maintaining the normal flow of air by creating negative pressure particularly for the assistance of the HVAC controls and power brake and to prevent excessive build up of the actual pressure on the engine. Piston, diaphragm, vane, and tandem vacuum fuel pumps have been used in some of the Enclave models at particular years. The vacuum problems which commonly occur in the vacuum pump is loud noise, a leakage problem, the problem with the constant pressure of vacuum and the problem of heat issues and the symptoms often associated with such problems are a hard brake pedal and a rough idle. Vacuum pump diagnosis and replacement during engine damages are significant for enhancing the vehicle's performance.

Each OEM Buick Enclave Vacuum Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Enclave Vacuum Pump Parts Questions & Experts Answers

  • Q: How do you remove the vacuum pump?
    A: To remove the vacuum pump, start by turning the ignition switch to OFF and pumping the brake pedal several times to deplete any remaining vacuum. Then, remove the engine cover to access the vacuum pump located at the left front corner of the engine compartment. Disconnect the vacuum hose by releasing the quick connect filling and position the power brake booster vacuum hose to the side. Disconnect the electrical connector and, if necessary, release the wiring from the bracket. Remove the nuts and pull the pump from the engine compartment, or remove the bolts from the pump bracket if needed. Retain the rubber mounting bushings and their sleeves. To install the vacuum pump, reverse the removal steps. If the replacement pump does not include rubber mounting bushings, transfer them from the old pump. Ensure the fasteners are tightened securely and check for proper operation of the brake booster system.

Related Buick Enclave Parts