Make sure this part fits

Oldsmobile 19202728 Front Brake Rotor Assembly

1992-1997 Oldsmobile Bravada

Customer Questions & Expert Answers (5)
GM 19202728 Front Brake Rotor Assembly
  • Part Description
    Rotor Asm,Front Brake ; Rotor, Front And Rear Wheel Brake
  • Position
    Front
  • Replaces
    15602574, 15725351, 18060217, 19152699
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number19202728
    Part DescriptionRotor Asm,Front Brake ; Rotor, Front And Rear Wheel Brake
    Other NamesHub & Rotor, Rotor
    Item Dimensions13.8 x 13.4 x 9.9 inches
    Item Weight22.10 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15602574, 15725351, 18060217, 19152699
    Require Quantity2
    ManufacturerGeneral Motors
    SKU19202728
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1996-1997, 1992-1994 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19202728 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to Inspect and Replace Brake Disc on Chevrolet Blazer,S10,GMC Jimmy and Sonoma? Posted by Customer
    A:
    To inspect the brakes, begin by loosening wheel lug nuts and raising the front of the vehicle on jack stands. Take off the wheel followed by the brake caliper. While checking for any score marks or damage on disc surfaces, remember that slight scratches and shallow grooves are normal and will not affect the brake operation. Nevertheless, deep grooves of over 0.015-inch deep necessitate disc removal and refinishing at a machine shop. Make sure both sides have been inspected thoroughly. When inspecting a rear disc, reinstall wheel lug nuts with flat side towards disc to hold it in a flat vertical plane during inspection. Washers may be needed under lug nuts to apply pressure to disc. To check for disc runout, place dial indicator about 1/2 inch from outer edge of disc and zero it out. Turn disk around while making sure that reading does not exceed 0.003 inches on indicator gauge; if it does so, then let machine shop refinish disk for you.Additionally don't allow multiple groves on your brake rotors which should be well maintained as long as they don't wear below specified minimum thickness.It is also possible to measure rotor thickness with micrometer.For removal and installation, on 2WD models, the disk is part of the front hub assembly and should be removed and installed according to front wheel bearing maintenance procedure.On 4WD models remove tire; remove caliper , then pull off disk from its mounting onto hub.
    Posted by GMPartsGiant Specialist
    Q:
    How do you check the disc thickness for the 1998 Chevrolet Blazer? Posted by Customer
    A:
    You can check the disc thickness with a micrometer. Make sure it does not go below the specified minimum thickness, which is cast into the disc.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    How do you inspect the brakes of the 2000 Chevrolet S10? Posted by Customer
    A:
    Start by loosening the wheel lug nuts and raising the front of the vehicle on jack stands. Remove the wheel and then the brake caliper.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should you check on the disc surface for the 1997 GMC Jimmy? Posted by Customer
    A:
    Check for any score marks or damage. Keep in mind that light scratches and shallow grooves are normal and won't affect brake operation. However, deep grooves over 0.015-inch deep will require disc removal and refinishing by a machine shop.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Disc
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19202728, the Right Choice

To ensure reliability, purchase GM part # 19202728 Front Brake Rotor Assembly. It is sometimes referred to as Oldsmobile Brake Disc. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Bravada models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19202728 Front Brake Rotor Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly