Make sure this part fits

GM 12385857 Shaft Kit,Front Upper Control Arm

1982-2005 GM

Customer Questions & Expert Answers (16)
GM 12385857 Shaft Kit,Front Upper Control Arm
  • Part Description
    SHAFT KIT, Steering Knuckle Upper Control Arm
  • Position
    Front Upper
  • Manufacturer
    General Motors
Make sure this part fits
$51.40 MSRP: $103.65
You Save: $52.25 (51%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12385857
    Part DescriptionSHAFT KIT, Steering Knuckle Upper Control Arm
    Item Dimensions4.7 x 4.6 x 17.3 inches
    Item Weight3.20 Pounds
    PositionFront Upper
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU12385857
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1987 Buick Regal6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, REGAL, STATION WAGON
    1995-2005 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1982-1987 Chevrolet El Camino6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L DieselCLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO
    1982-1983 Chevrolet Malibu6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L DieselCLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO
    1982-1988 Chevrolet Monte Carlo6 Cyl 3.8L, 6 Cyl 4.3L, 6 Cyl 4.3L Diesel, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L DieselCLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO
    1982-2003 Chevrolet S104 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.2L Flex, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1992-2001 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1982-1991 GMC S154 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1991-2003 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.2L Flex, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3LPICKUP
    1991 GMC Syclone6 Cyl 4.3LPICKUP
    View More
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 12385857 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the next step after freeing the ball joint from the steering knuckle for the 1981 Buick Regal? Posted by Customer
    A:
    Turn off the nut at the end of the ball stud, removing it along with any washers, and lift the upper arm to free the ball stud from the knuckle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after separating the steering knuckle for the 1983 Buick Regal? Posted by Customer
    A:
    Carefully lower the jack under the control arm to release the spring, and if necessary, pry the spring off its seat on the lower control arm with a pry bar.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after installing the upper control arm for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    Attach the balljoint to the steering knuckle and connect the brake hose bracket. Install the wheel and lower the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the control arm on the 1998 Chevrolet Blazer? Posted by Customer
    A:
    To remove the control arm on a 2WD model, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel and then the coil spring. Disconnect the lower balljoint and take the control arm to a dealer or properly equipped shop for any necessary replacements of the balljoint and bushings.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the installation be performed for the 1981 Chevrolet El Camino? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    Q:
    Is it necessary to remove the control arm for bushing replacement for the 1985 Chevrolet El Camino? Posted by Customer
    A:
    Removing the control arm is not necessary for bushing replacement, except for the front bushings on 1975 and later models.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step in the process of removing the upper control arm for the 1977 Chevrolet El Camino? Posted by Customer
    A:
    Raise the front end of the vehicle and lower the control arm onto a jack for support, then remove the wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the control arm for the 1998 Chevrolet S10? Posted by Customer
    A:
    To install the control arm, reverse the removal steps, making sure to tighten all fasteners to the suitable torque specifications once the vehicle is at normal ride height.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done during the installation process for the 1991 Oldsmobile Cutlass? Posted by Customer
    A:
    For installation, follow the reverse of the removal procedure and torque-tighten the nuts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    Is there another method of removing the control arm for the 1995 GMC Jimmy? Posted by Customer
    A:
    Yes, there is another method of removal. Begin by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel and front splash shield if applicable. Disconnect the shock absorber and stabilizer bar from the lower control arm. Remove the torsion bar and then the lower control arm by detaching the lower balljoint from the steering knuckle. Check the bushings for damage or wear, replacing the control arm if necessary.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you disconnect the upper balljoint from the steering knuckle for the 2001 GMC Jimmy? Posted by Customer
    A:
    Disconnect the upper balljoint from the steering knuckle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the upper control arm of the 1995 GMC Sonoma? Posted by Customer
    A:
    Position it in the frame brackets and install the bolts and nuts, ensuring they are facing each other. Do not tighten completely.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do I install the ball stud for the 1996 Oldsmobile Cutlass? Posted by Customer
    A:
    Install the ball stud through the knuckle, torque-tighten the nut, further tighten to align the cotter pin holes, and fit a new cotter pin.
    Posted by GMPartsGiant Specialist
    Q:
    How do you install the control arm of the 1995 GMC Sonoma? Posted by Customer
    A:
    To install the control arm, reverse the removal steps, making sure to tighten all fasteners to the suitable torque specifications once the vehicle is at normal ride height.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after removing the pivot shaft nuts, bolts, and shims on the 2000 Chevrolet S10? Posted by Customer
    A:
    Remove the upper control arm pivot bolts and nuts, and inspect the pivot bolt bushings for wear. Replace if necessary.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12385857, the Right Choice

To ensure reliability, purchase GM part # 12385857 Shaft Kit,Front Upper Control Arm. It is sometimes referred to as GM Control Arm. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Regal models. It fits Chevrolet Blazer, Malibu, S10. It also fits GMC Jimmy, S15, Sonoma. This also fits Pontiac Bonneville, Grand Prix.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 12385857 Shaft Kit,Front Upper Control Arm. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly