Make sure this part fits

GM 22947663 Front Lower Control Arm Assembly

1997-2016 GM

Customer Questions & Expert Answers (4)
GM 22947663 Front Lower Control Arm Assembly
  • Part Description
    Arm Assembly, Front Lower Control ; Arm, Steering Knuckle Lower Control
  • Position
    Front Lower
  • Replaces
    10328897, 10303057, 10348612, 10287709, 10328899, 10301553, 15293664, 15293661, 10301555, 10291504, 10348610, 15293666, 20977506, 25853334
  • Manufacturer
    General Motors
Make sure this part fits
$168.46 MSRP: $293.20
You Save: $124.74 (43%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22947663
    Part DescriptionArm Assembly, Front Lower Control ; Arm, Steering Knuckle Lower Control
    Other NamesLower Control Arm
    Item Dimensions4.9 x 21.4 x 13.9 inches
    Item Weight8.90 Pounds
    PositionFront Lower
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10328897, 10303057, 10348612, 10287709, 10328899, 10301553, 15293664, 15293661, 10301555, 10291504, 10348610, 15293666, 20977506, 25853334
    ManufacturerGeneral Motors
    SKU22947663
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2009 Buick Allure6 Cyl 3.6L, 6 Cyl 3.8L, 8 Cyl 5.3LCX (US)/ALLURE CX (CAN), CX 4 DOOR, CXL 4 DOOR, CXL(US)/ALLURE CXL(CAN), CXS 4 DOOR, CXS(US)/Allure CXS(CAN), SUPER SERIES 4 DOOR
    2005-2009 Buick LaCrosse6 Cyl 3.6L, 6 Cyl 3.8L, 8 Cyl 5.3LCX (US)/ALLURE CX (CAN), CX 4 DOOR, CXL 4 DOOR, CXL(US)/ALLURE CXL(CAN), CXS 4 DOOR, CXS(US)/Allure CXS(CAN), SUPER SERIES 4 DOOR
    2000-2016 Chevrolet Impala6 Cyl 3.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 3.9L, 6 Cyl 3.9L Flex, 8 Cyl 5.3LIMPALA, LS, LS POLICE CAR, LT, LT 3.5, LTZ, POLICE CAR, SS
    2000-2001 Chevrolet Lumina6 Cyl 3.1LIMPALA, LS, SS
    2000-2007 Chevrolet Monte Carlo6 Cyl 3.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.8L, 6 Cyl 3.9L, 8 Cyl 5.3LIMPALA, LS, LT, POLICE CAR, SS
    1997-2008 Pontiac Grand Prix6 Cyl 3.1L, 6 Cyl 3.8L, 8 Cyl 5.3L2 DOOR, 4 DOOR, GT 2 DOOR, GT 4 DOOR, GT2 4 DOOR, GTP 2 DOOR, GTP 4 DOOR, GXP 4 DOOR, SE 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 22947663 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to disassemble the control arm? Posted by Customer
    A:
    To disassemble the control arm, start by marking the relationship of the control arm to the front mounting bracket while the vehicle is at normal ride height. Then, loosen the wheel lug nuts, apply the parking brake, and raise the front of the vehicle. Support it securely on jackstands and remove the wheel. Next, remove the stabilizer bar link from the control arm and either remove the steering knuckle or separate the balljoint from the steering knuckle. After that, remove the fasteners that attach the control arm to the subframe and separate the control arm from the subframe. For inspection, check the control arm for distortion and the bushings for wear, replacing any worn or damaged parts. Do not attempt to straighten a bent control arm. If the bushings are cracked or show signs of wear, take the control arm to have the bushings replaced. To install the control arm, reverse the removal steps and tighten all fasteners to the proper torque values. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the proper torque specifications. Finally, it is recommended to have the front wheel alignment checked and adjusted if necessary after completing this job.
    Posted by GMPartsGiant Specialist
    Q:
    How do you install the rear bushing of the 2011 Buick LaCrosse? Posted by Customer
    A:
    Install the new bushing with a new bolt and tighten it properly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should I do after removing the stabilizer bar link and steering knuckle of the 2006 Chevrolet Impala? Posted by Customer
    A:
    After that, remove the fasteners that attach the control arm to the subframe and separate the control arm from the subframe.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 22947663, the Right Choice

To ensure reliability, purchase GM part # 22947663 Front Lower Control Arm Assembly. It is sometimes referred to as GM Control Arm. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Allure, LaCrosse models. It fits Chevrolet Impala, Lumina, Monte Carlo. It also fits Pontiac Grand Prix.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 22947663 Front Lower Control Arm Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly