Make sure this part fits your vehicle

Chevrolet 22845688 Propeller Shaft Assembly

2007-2014 Chevrolet

GM 22845688 Propeller Shaft Assembly
  • Part Description
    Shaft Assembly, Propeller
  • Replaces
    22828500, 20871263, 20912703, 10383383
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number22845688
    Part DescriptionShaft Assembly, Propeller
    Other NamesDrive Shaft
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22828500, 20871263, 20912703, 10383383
    ManufacturerGeneral Motors
    SKU22845688
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2013 Chevrolet Avalanche8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L1/2 TON
    2007-2014 Chevrolet Suburban8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L1/2 TON

Customer Questions & Answers

Q:
I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 22845688 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
What may indicate problems with the driveshaft or other components for the 2013 Chevrolet Avalanche? Posted by Customer
A:
Noise or vibration while driving may indicate problems with the driveshaft or other components.
Posted by GMPartsGiant Specialist
See expert answers on similar Drive Shaft
Q:
How to remove and install the driveshaft on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
A:
Raising the vehicle and supporting it on jackstands, with the front wheels blocked, would remove the rear driveshaft. In order to reinstall in the same position reference marks should be made on the driveshaft and pinion flange and ensure that the transmission is in Neutral with the parking brake off. The drive shaft should be lowered by removing its back u-joint bolts and retainers then slid out of transfer case or transmission. When installing, slide front end into transmission or transfer case then raise rear into position with marks aligned. Afterward, all bolts must be tightened to their proper torque specifications and clamps used to secure bearing caps. For 4WD models' front drive shaft, raise vehicle using jack stands after removal of differential carrier splash shield if any. The boot at the transfer case output shaft should be disengaged and relationship between driveshaft and companion flange marked for future reference. Thereafter disconnect bolts as well as clamps from differential flange while pushing driveshaft toward rear so that it can be separated from this flange before lowering it down to pull out of transfer case. To install, insert a sliding shaft that has splines at its rear through transfer case's output ends while aligning marks attached to them with those found on companion flange's front end. Install clamps together with bolts tightly according to specified torque values whereas push up boot over groove of transfer case output shaft where new clip will have been crimped into place subsequently using clamp-crimping pliers for reinforcement purposes. Lastly, splash shield of front differential carrier should be installed back there again.
Posted by GMPartsGiant Specialist
Q:
Where are universal joints located in a driveshaft of the 2007 Chevrolet Suburban? Posted by Customer
A:
Universal joints are located at either end and in the center of two-piece driveshafts.
Posted by GMPartsGiant Specialist
See expert answers on similar Drive Shaft
Q:
How should the front driveshaft on the 2010 Chevrolet Suburban be removed? Posted by Customer
A:
The vehicle should be raised and supported on jackstands, with the differential carrier splash shield removed if equipped.
Posted by GMPartsGiant Specialist
See expert answers on similar Drive Shaft
Q:
What must be done before removing the rear driveshaft for the 2012 GMC Yukon? Posted by Customer
A:
The vehicle must be raised and supported on jackstands, with the front wheels blocked. The transmission should be in Neutral with the parking brake off, and reference marks made on the driveshaft and pinion flange to ensure reinstallation in the same position.
Posted by GMPartsGiant Specialist
See expert answers on similar Drive Shaft
Q:
What may indicate problems with the driveshaft or other components for the 2009 GMC Yukon? Posted by Customer
A:
Noise or vibration while driving may indicate problems with the driveshaft or other components.
Posted by GMPartsGiant Specialist
See expert answers on similar Drive Shaft
Q:
What other vehicles use this drive shaft? Posted by Customer: 2009 Light Truck Avalanche / Escalade EXT - 36 Bodystyle (4WD / AWD)
A:
2009-2014 K BODY
Posted by GMPartsGiant Specialist 10/12/2021
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 22845688, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 22845688 Propeller Shaft Assembly. It is sometimes referred to as Chevrolet Drive Shaft. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Avalanche, Suburban models.

Affordable, reliable and built to last, GM part # 22845688 Propeller Shaft Assembly stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly