Make sure this part fits

Cadillac 10243271 Balancer Assembly, Crankshaft

1999-2000 Cadillac Escalade

Customer Questions & Expert Answers (5)
GM 10243271 Balancer Assembly, Crankshaft
  • Part Description
    BALANCER, Engine Crankshaft And Camshaft Balancer
  • Manufacturer
    General Motors
Make sure this part fits
$85.76 MSRP: $149.26
You Save: $63.50 (43%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number10243271
    Part DescriptionBALANCER, Engine Crankshaft And Camshaft Balancer
    Other NamesVibration Damper
    Item Dimensions8.9 x 8.5 x 3.6 inches
    Item Weight10.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10243271
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1999-2000 Cadillac Escalade8 Cyl 5.7L1 TON CREW CAB, 1/2 TON, 3/4 TON, 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, K2500 CREW CAB, K3500 CAB CHASSIS 135.5, K3500 CAB CHASSIS 159.9, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, YUKON/DENALI/ESCALADE
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10243271 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install a vibration damper on 4.3L V6 engine for Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery. Remove the engine cooling fan, then remove the engine drivebelt. Remove the bolts and separate the crankshaft pulley from the harmonic balancer. Remove the large harmonic balancer-to-crankshaft bolt. To keep the crankshaft from turning, remove the starter and have an assistant wedge a large screwdriver against the ring gear teeth. A chain or strap wrench can also be used to secure the balancer. Using the proper puller, detach the harmonic balancer from the crankshaft. Be careful not to lose the Woodruff key. Make a written note of any weights used in the balancer, their locations, and lengths. These weights must be installed in exactly the same way when the balancer is installed. If a new harmonic balancer is being installed, transfer the weight(s) to the new balancer in the proper location(s). Make sure the woodruff key is in place, then position the harmonic balancer on the crankshaft and slide it on as far as it will go. Use a small dab of RTV sealant on the keyway of the balancer before installation. Note that the slot (keyway) in the hub must be aligned with the Woodruff key at the end of the crankshaft. Using a harmonic balancer installation tool, press the balancer onto the crankshaft. Note that the crankshaft bolt can also be used to press the crankshaft balancer into position, but when doing so, use a liberal amount of clean engine oil on the bolt threads to prevent galling. Make sure the raised crown of the balancer bolt washer is away from the crankshaft. Tighten the crankshaft bolt to the torque specifications. The remainder of installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    Q:
    What components need to be removed to access the crankshaft pulley/balancer for the 2008 GMC Sierra? Posted by Customer
    A:
    To access the crankshaft pulley/balancer, you should remove the drivebelt, cooling fan, and shroud assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    Is there anything that needs to be removed from beneath the 2010 Chevrolet Silverado? Posted by Customer
    A:
    Yes, if equipped, you should remove the stone shield from below the engine.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What's the next step after removing the engine drive belt for the 2008 GMC Sierra? Posted by Customer
    A:
    The next step is to remove the bolts and separate the crankshaft pulley from the vibration damper.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10243271, the Right Choice

To ensure reliability, purchase GM part # 10243271 Balancer Assembly, Crankshaft. It is sometimes referred to as Cadillac Harmonic Balancer. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Escalade models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10243271 Balancer Assembly, Crankshaft. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly