Make sure this part fits

Buick 10191767 Seal, Crankshaft Rear Main Bearing Cap

1985-1999 Buick

Customer Questions & Expert Answers (8)
GM 10191767 Seal, Crankshaft Rear Main Bearing Cap
  • Part Description
    SEAL, Engine Rear Main Bearing
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$13.05
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number10191767
    Part DescriptionSEAL, Engine Rear Main Bearing
    Other NamesCap, Rear Main Seal
    Item Dimensions6.8 x 4.6 x 0.2 inches
    Item Weight1.20 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10191767
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-1999, 1994, 1987-1989 Buick Century6 Cyl 2.8L, 6 Cyl 3.1LCUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, GS, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LS, REGAL, SPECIAL 4 DOOR, SPECIAL STATION WAGON
    1997-1999, 1988-1993 Buick Regal6 Cyl 2.8L, 6 Cyl 3.1L2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, GS, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LS, REGAL
    1994, 1985 Buick Skylark6 Cyl 2.8L, 6 Cyl 3.1LCUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10191767 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do I replace the rear main bearing seal in the 1986 Buick Century? Posted by Customer
    A:
    Remove the oil pan, pump, and rear main bearing cap. Pry out the lower seal and lightly tap the upper seal out. Clean all mating surfaces and install the new seals by lubricating the seal lips and beads, making sure the lips face the front of the engine. Use an installation tool to protect the seal as you work it around the crankshaft. Ensure there is no oil on mating surfaces, then replace the oil pan, pump, and run the engine to break in the new seals.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you install the new rear main oil seal for the 1996 Chevrolet Beretta? Posted by Customer
    A:
    Drive the new seal into the housing with a block of wood or a section of pipe. Lubricate the crankshaft seal journal and the lip of the new seal with moly-base grease. Slowly and carefully push the new seal onto the crankshaft while pushing the housing against the block.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How can you drive the seal into place for the 1987 Chevrolet Beretta? Posted by Customer
    A:
    Drive the seal into place using a large socket and a hammer. If a large socket is not available, a piece of pipe will also suffice.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should you lubricate the seal lip for the 1996 Chevrolet Beretta? Posted by Customer
    A:
    Use moly-base grease or clean engine oil.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the old oil seal be removed for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    Pry the old oil seal out with a seal removal tool or a screwdriver.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How can the old seal be removed from the housing for the 1989 Chevrolet Beretta? Posted by Customer
    A:
    The old seal can be removed from the housing by driving it out from the back side using a hammer and punch.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should you do if the seal bore has nicks and scratches for the 1987 Chevrolet Beretta? Posted by Customer
    A:
    If the seal bore has nicks and scratches, carefully smooth it with a fine file if necessary, but be careful not to nick the crankshaft in the process.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10191767, the Right Choice

To ensure reliability, purchase GM part # 10191767 Seal, Crankshaft Rear Main Bearing Cap. It is sometimes referred to as Buick Crankshaft Seal. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Regal, Skylark models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10191767 Seal, Crankshaft Rear Main Bearing Cap. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly