Buick 22915244 Mirror Assembly, Inside Rear View

You can Select Your Vehicle to check if 22915244 fits your vehicle.

If the mirror fails the off-vehicle test, it should be replaced.

For installation, simply reverse the removal process.

Use a special mirror adhesive kit and follow the instructions on the package. Allow the base to bond overnight before attaching the mirror.

If the mirror fails the test with jumper wires, you should replace the mirror.

If there is a malfunction related to the systems controlled by the BCM, it is recommended to have the vehicle diagnosed by a dealership service department or another qualified automotive repair facility with professional-grade scan tools for accurate troubleshooting.

To remove the inside mirror from its mount, you need to remove the setscrew located at the base of the mirror stalk and then slide the mirror upwards.

Disconnect the electrical connector before proceeding.

Most electric rearview mirrors use two motors, one for up and down movements and one for left-right adjustments.

For installation, simply reverse the removal process.

If the mirrors do not operate and no sound comes from them, you should check the fuse.

To troubleshoot any issues with the mirrors, start by operating the mirror control switch through all functions for both the left and right side mirrors while listening for the sound of the electric motors running.

If the mirrors don't operate as expected, you can perform several checks: With the ignition in the ACC position and the engine off, operate the mirror control switch through all functions for both left and right side mirrors. Listen for the sound of the electric motors inside the mirrors. If you hear the motors but the mirror glass doesn't move, there might be a problem with the drive mechanism inside the mirror. In such cases, the defective mirror must be replaced as a unit. If there is no sound coming from the mirrors and they don't operate, first check the fuses. If the fuses are okay, proceed with further diagnosis. Remove the mirror control switch and have its continuity checked by a dealer service department or qualified shop. Check the ground connections. If the mirror still doesn't work, remove the mirror and check the wires at the mirror for voltage. If there's no voltage in each switch position, check the circuit between the mirror and control switch for opens and shorts. If there is voltage, remove the mirror and test it off the vehicle with jumper wires. Replace the mirror if it fails this test.

If the mirrors do not operate and no sound comes from them, you should check the fuse.

Use a special mirror adhesive kit and follow the instructions on the package. Allow the base to bond overnight before attaching the mirror.

Disconnect the electrical connector if there are electronic components. Remove the set screw and slide the mirror up off the support base on the windshield.

If the mirror fails the test with jumper wires, you should replace the mirror.

Disconnect the electrical connector if there are electronic components. Remove the set screw and slide the mirror up off the support base on the windshield.

Electric rearview mirrors in vehicles use two motors to adjust the glass.

Disconnect the electrical connector if there are electronic components. Remove the set screw and slide the mirror up off the support base on the windshield.

Disconnect the electrical connector if there are electronic components. Remove the set screw and slide the mirror up off the support base on the windshield.

If the mirrors do not operate and no sound comes from them, you should check the fuse.

To disconnect the electrical connector from the back of the mirror, you need to remove the small insulator and then disconnect the electrical connector.