Q: How do you remove and install outside and inside mirrors on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the outside side view mirrors, start by removing the door trim panel and upper corner interior trim panel. If the side view mirrors are power mirrors, disconnect the wiring harness before removing the nuts and detaching the side view mirror from the door. To install, simply reverse the removal process. For the inside mirror, disconnect the electrical connector if there are electronic components. Remove the set screw and slide the mirror up off the support base on the windshield. To reattach the support base, use a special mirror adhesive kit and follow the instructions on the package, allowing the base to bond overnight before attaching the mirror.
Q: How to troubleshoot electric rearview mirrors on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To troubleshoot any issues with the electric rearview mirrors, operate the mirror control switch and listen for motor sounds. If the glass doesn't move, there may be a problem with the drive mechanism. If there's no sound, check the Fuse and ensure proper grounding. If the mirror still doesn't work, check the wires for voltage. Check for voltage to determine if the mirror needs to be tested or replaced. Look for potential circuit openings or short circuits if no voltage is detected.