Make sure this part fits

Buick 7470503 New Old Stock Rear Wheel Hub Assembly

1984-1993 Buick

Customer Questions & Expert Answers (8)
GM 7470503 New Old Stock Rear Wheel Hub Assembly
  • Part Description
    Hub Asm,Rear Wheel ; Hub, Rear Wheel
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number7470503
    Part DescriptionHub Asm,Rear Wheel ; Hub, Rear Wheel
    Item Dimensions7.1 x 6.8 x 6.6 inches
    Item Weight8.50 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU7470503
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1984-1993 Buick Century4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.3L DieselCUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR, SPECIAL 4 DOOR, SPECIAL STATION WAGON
    1985-1990 Buick Electra6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L2 DOOR, 4 DOOR, COUPE 2 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR, SEDAN 4 DOOR, T-TYPE COUPE 2 DOOR, T-TYPE SEDAN 4 DOOR, ULTRA SEDAN 4 DOOR
    1986-1992 Buick Lesabre6 Cyl 3.0L, 6 Cyl 3.8L2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR
    1988-1990 Buick Reatta6 Cyl 3.8L2 DOOR, REATTA, RIVIERA, T TYPE
    1988-1993 Buick Regal6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.8L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, REGAL
    1986-1990 Buick Riviera6 Cyl 3.8L2 DOOR, REATTA, RIVIERA, T TYPE
  • Customer Questions & Expert Answers

    Q:
    Will this part number fit my car? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 7470503 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove and install the hub and bearing assembly on Cadillac ElDorado and Fleetwood? Posted by Customer
    A:
    The vehicle should be raised and the support should be safe. Take off the wheel and tire assembly. For Deville and Fleetwood 1990-93 models, remove brake drum, removing the retaining bolts and hub and bearing assembly from the axle. Be cautious around sensor wires of anti-lock brakes; unplug them if necessary. Tightening bolts to 52 ft.Ibs (70Nm), install hub and bearing assembly with retaining bolts. Reconnect anti-lock brake sensor wire as required. Install brake drum, wheel and tire assembly, then lower vehicle. To remove rear brake caliper on Eldorado and Seville 1990-92 models, slacken parking brake cable at adjuster, lift up end of cable spring to free end of cable from lever, take out bolt and washer attaching cable support bracket to caliper, remove caliper mounting bracket bolts and hang caliper in wheel well with wire. Do not disconnect brake hose or let the caliper hang by the hose. If provided, discard disc brake rotor retainers and take away disc brake rotor . Remove hub mounting bolts then remove hub and bearing assembly . Set hub and bearing assembly on knuckle; install mounting bolts . Tighten to 52 ft.Ibs.(70 Nm). Put disc brake rotor , caliper using all new mounting bracket bolts as well as parking brake cable backing plate. Adjust parking brakes . Put on wheel / tire , lowering vehicle.For 1993-98 Eldorado & Seville, & 1994-98 Deville remove parking brake cable bracket from knuckle . Take out & discard caliper mounting bracket bolts . Suspend the caliper in wheel well using wire . Do not disconnect the brake hose or allow the caliper to hang by the hose . Remove disc brake rotor . Remove hub mounting bolts then take out hub & bearing assembly . Fasten these mounting bolts to 52 ft.Ibs.(70 Nm) . Put on disc brake rotor , caliper using new mounting bracket bolts & parking brake cable bracket. Put on wheel and tire , lowering vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done if the bearings are too loose for the 1980 Buick Century? Posted by Customer
    A:
    If the bearings are too loose, clean and inspect them before repacking and adjusting.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done to prevent the rotor from turning during removal for the 1990 Cadillac ElDorado? Posted by Customer
    A:
    Insert a drift punch through the caliper and into the rotor to keep the rotor from turning.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    How should the hub nut be tightened for the 1992 Cadillac Fleetwood? Posted by Customer
    A:
    On 1990-91 vehicles, tighten the hub nut to 185 ft. lbs. (251 Nm). On 1992-98 vehicles, tighten the hub nut to 110 ft. lbs. (145 Nm), except on Deville and Fleetwood equipped with J55 brake, in which case the torque is 130 ft. lbs. (177 Nm).
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What steps should be followed after installing the hub and bearing assembly on the 1995 Cadillac Fleetwood? Posted by Customer
    A:
    Install the disc brake rotor, the caliper with new mounting bracket bolts, and the parking brake cable support bracket. Adjust the parking brake. Install the wheel and tire assembly and lower the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    How should you clean the front wheel bearings for the 1982 Oldsmobile Cutlass? Posted by Customer
    A:
    Use clean parts solvent to remove all traces of the old grease from the bearings, hub, and spindle. You can use a small brush, but make sure no bristles embed themselves inside the bearing rollers. Allow the parts to air dry.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done with the old oil seal of the 1984 Oldsmobile Cutlass? Posted by Customer
    A:
    The old oil seal should be discarded.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 7470503, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 7470503 New Old Stock Rear Wheel Hub Assembly. It is sometimes referred to as Buick Wheel Bearing, Buick Wheel Hub. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Buick Century, Lesabre, Regal models.

Affordable, reliable and built to last, GM part # 7470503 New Old Stock Rear Wheel Hub Assembly stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly