My Garage
My Account
Cart
Genuine Saturn Vue Clutch Slave Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Clutch Slave Cylinder found
Saturn Vue Clutch Slave Cylinder
The Clutch Slave Cylinder in Saturn Vue vehicles is very important in the operation of the manual transmission system since it works together with the Clutch Master Cylinder to hinder the operation of the clutch when the pedal is compressed. This hydraulic switch translates the pressure from the driver into hydraulic pressure whereby a rod is protracted to counter act with a lever or a fork to enable the driver change gears safely. In the years passed, the Saturn Vue vehicles have used hydraulic clutch slave cylinders and these are very vital for proper functioning of the transmission. If problems occur like poor quality of the non-linear feel of the clutch pedal or the occurrence of leaks, it is imperative to address the faulty clutch slave cylinder to avoid transmission problem and diminishing driving capabilities of the vehicle.
Each OEM Saturn Vue Clutch Slave Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Saturn Vue Clutch Slave Cylinder Parts Questions & Experts Answers
- Q: How do you remove and inspect the transaxle and actuator cylinder on Saturn Vue?A: To do this the Clutch Slave Cylinder can be un bolted from the transaxle. To inspect the bearing, use a clean rag to remove any dirt and look at for signs of damage, wear and cracks, do not immerse it in solvent as it is designed to be sealed for life. Grasp the central part of the bearing and turn the outer part pressing on it; if it rotates with a squeak, a rumble or a groan, it should be changed. The Clutch Slave Cylinder is best replaced whenever the clutch components have been changed as this can be rather challenging. Rotate the bearing to as to make it slightly stiff; if it has no stiffness at all, then it must be replaced. For installation, apply high temperature grease on the inside diameter of the Clutch Slave Cylinder bearing and then fit the Clutch Slave Cylinder to the transaxle and tight the bolts. Apply a thin coat of high temperature grease on the face of the release bearing Then it follows the reversed process of the removal.
