My Garage
My Account
Cart
Genuine Saturn LS Fog Light Bulb
Fog Lamp Bulb- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fog Light Bulbs found
Saturn LS Bulb Asm,Headlamp (Low Beam)
Part Number: 19257054$13.77 MSRP: $24.72You Save: $10.95 (45%)Ships in 1-2 Business Days
Saturn LS Bulb,Front Fog Lamp
Part Number: 13590791$12.34 MSRP: $22.14You Save: $9.80 (45%)Ships in 1-3 Business Days
Saturn LS Fog Light Bulb
Fog Light Bulbs are used mostly on Saturn LS vehicles in order to improve vison during conditions such as fog, rain and snow. Low beam bulbs are securely installed in the car and shine a broad, flat beam parallel to the road, thus reducingasperity and enhancing visibility. Through the years, Saturn LS has been using different types of Fog Light Bulbs such as Halogen bulbs and better and improved ones. The Halogen bulbs, though efficient, are known to fade off and whenever this is discovered, the bulbs should be replaced in pairs. Upgrade Halogen bulbs offer high brightness and different color temperature, LED Fog Light bulbs have the benefit, longevity, and energy saving. Two enhanced models dovetail into the rear fog light assembly Housing for Saturn LS vehicles hence no change in location.
Each OEM Saturn LS Fog Light Bulb we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Saturn LS Fog Light Bulb Parts Questions & Experts Answers
- Q: How do you replace the Fog Light Bulb on Saturn LS?A: When turning the front turn signal bulbs, the hood should be opened and the amber lens front turn signal should be looked for; it is the outer bulb socket. Pull out the socket by unscrewing it anti-clockwise, and pull the bulb in a manner perpendicular with respect to the direction of the socket. For the front sidemarker bulbs, there is a socket within an amber lens housing that is located at the front corners of the vehicle; if further access is required, the housing can be pulled forward at the frontmost edge. Twist the socket in the anticlockwise direction a quarter turn and pull it out and pull the bulb in the same way. Fog light bulbs, if available, are at the lower edges of the front bumper housing and can be removed from below; lift the car safely, twist the base anti-clockwise, holding it down and pull to remove. Pull out the electrical connector from the bulb and for the bulb simply twist and pull it off the socket. To replace the center-mount brake light bulbs, being by finding the assembly inside of the vehicle, retract the trim lid, and then twist the bulb socket counter clockwise to remove it. The bulb is actually permanently attached to the base so that both should be replaced together. Regarding brake, tail, turn and back up light bulbs, open the trunk or the lift gate, unscrew the trim panel then turn the socket anti-clockwise. Switch off the item and wait for some time until it is cool enough the output shaft then rotate it 1/8 clockwise so as to pull out the bulb, when replacing the bulb make sure that the locator pins are lined up. License plate light bulbs can be replaced by removing the screws which is holding the lens of the license plate then pulling down the assembly to reveal the bulb. In the case of dome light assemblies pry off the lens, pull the bulb by the contacts, and reassemble in reverse.
