Genuine Saturn Ion Knock Sensor

Engine Knock Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

  • Saturn Ion Knock Sensor - 12567711
    View related parts

    Saturn Ion Sensor Assembly, Knock

    Part Number: 12567711
    $28.27 MSRP: $53.34
    You Save: $25.07 (47%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: SENSOR, Distributor (also Knock Sensor); Knock Sensor
    • Replaces: 24577244, 12615500, 12589373
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2003-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L

Saturn Ion Knock Sensor

The Knock Sensor in Saturn Ion automobiles is used in determining engine knock which is a condition that arises as a result of wrong ignition timing. This device also transmits signals to the power train control module (PCM) so that it can be able to alter the ignition interval in a bid to reduce severe detonation. General, Saturn Ion vehicles employed piezoelectric knock sensors for it converts shock into electrical signal, so as to continuously address pressure amplitude correlated with knocking. When knock is sensed then the PCM detracts the ignition timing by a slightly higher value than before until the normal combustion is achieved and then start to advance slowly. This procedure is quite beneficial to sustaining the engines premier performance and in the same time diam ant from the effects of low octane fuels. The capacity to fine-tune ignition timing for each cylinder improves the utility of the system since it optimises the operation of the engine in various situations.

Each OEM Saturn Ion Knock Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn Ion Knock Sensor Parts Questions & Experts Answers

  • Q: How do you remove the knock sensor on the Chevrolet Cobalt,HHR and Saturn ION?
    A: To remove the knock sensor, begin by turning off the ignition key and raising the front of the vehicle, securely supporting it on jackstands. If you're removing the front sensor, remove the alternator, and if you're removing the rear sensor, remove the starter motor.

Related Saturn Ion Parts