My Garage
My Account
Cart
Genuine Pontiac Phoenix Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Parking Brake Cables found
Pontiac Phoenix Parking Brake Cable
The Parking Brake Cable is an important unit of car's parking brake system found in Pontiac Phoenix automobiles and provides resistance to the car when it is parked mostly on hilly areas. This cable links the parking brake or the emergency brake or the hand brake to the brakes so that they can engage well. For this reason, in the years of Pontiac Phoenix production, it is possible that different types of Parking Brake Cable have been fitted to meet the operational needs of the brand. Some of the symptoms of a bad Parking Brake Cable include: Inadequate tension of the parking brake cable which means that the parking brake cannot hold the vehicle securely when parked or completely failure of the parking brake if the cable breaks. It is important that one perform periodic maintenance on the Parking Brake Cable to help in increasing the reliability of the Pontiac Phoenix.
Each OEM Pontiac Phoenix Parking Brake Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac Phoenix Parking Brake Cable Parts Questions & Experts Answers
- Q: How to remove and install the rear right brake shoes and parking brake cable on a Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?A: Support the rear of the car on jackstands and remove the wheel and brake drum. With a screwdriver inserted between the brakeshoe and the top part of the brake adjuster bracket, push the bracket to the front and release the top adjuster bracket rod. Remove the rear hold-down spring and remove the actuator lever and lever return spring. Remove the adjuster screw spring. Remove the top rear brake shoe return spring. Unhook the parking brake cable from the parking brake lever. Compress the locking spring tabs securing the parking brake cable to the backing plate and withdraw the cable. Mark the location of the adjusting nut so the parking brake adjustment will not be lost, then remove the adjusting nut that.secures the equalizer to its retaining bolt and remove the bolt. Compress the locking spring tabs of the cable casing and remove the cable from the guide bracket. Unhook the cable from the connector on the rear axle, that connects it to the left rear cable. Remove the cable casing from the rear axle. Installation Is the reverse of the removal procedure. When the operation is complete check that the parking brake adjustment is correct, and adjust If necessary.
- Q: How to remove the rear left parking brake cable from the brake for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?A: Remove the parking brake cable from the brake by following the procedure described in paragraphs 1 through 7. Remove the cable casing from the rear axle. Unhook the cable from the connector on the rear axle that connects it to the right rear cable. Installation is the reverse of the removal procedure.
- Q: How do you depress the front parking brake pedal and remove the cable?A: Depress the parking brake pedal. Clamp locking pliers on the cable where it enters its casing. Pull the brake release and remove the cable from the control assembly. Release the locking tabs on the casing and remove the casing from the control assembly. Push the grommet and cable through the cowl and into the engine compartment. Remove the cable from its guide bracket attached to the engine cowl. Remove the cable from its guide attached to the underside of the rocker panel. Remove the cable from the equalizer lever. Installation is the reverse of the removal procedure.
