How to replace a fuel filter in a Pontiac Grand Prix?

Relieve the fuel system pressure. Raise the vehicle and support it securely on jackstands. Unscrew the fuel line-to-fuel filter fittings. Use a back-up wrench on the fuel filter side of the fitting; use a flare-nut wrench to unscrew the outer nut. Use a back-up wrench to keep from twisting the line. If the car is equipped with plastic "quick-connect" fittings, squeeze the tabs on the fitting and pull it apart. If the car is equipped with metal quick-connect fittings, pull back the rubber boot and twist the fitting one-quarter turn to loosen any dirt. Then, if compressed air is available, blow the dirt away from the connection. Use a special fuel line separator tool to disconnect the fitting. Remove the filter from the clip. Snap the new filter securely into the clip. Make sure the arrow on the filter points toward the engine. Using new O-rings, reattach the fuel lines to the filter. Apply a few drops of clean engine oil to the O-rings to ease reassembly.

Genuine Pontiac Grand Prix Fuel Filter

Gas Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Filters found

View related parts
Pontiac Grand Prix Strainer,Fuel Sender Fuel
Part Number: 5651702
Product Specifications
- Other Name: FILTER, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, LE 2 DOOR, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Pontiac Grand Prix Filter Kit,Fuel
Part Number: 25171792
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25055052, 25121792, 25121915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, GT 2 DOOR, LE 2 DOOR, SE 2 DOOR, SE 4 DOOR, STE 4 DOOR | 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 4.3L
View related parts
Pontiac Grand Prix Filter,Fuel
Part Number: 25121293
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25121942
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2003 Pontiac Grand Prix | 2 DOOR, 4 DOOR, GT 2 DOOR, GT 4 DOOR, GTP 2 DOOR, GTP 4 DOOR, LE 4 DOOR, SE 2 DOOR, SE 4 DOOR, STE 4 DOOR | 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Pontiac Grand Prix Filter Assembly, Fuel
Part Number: 10337405
$11.87 MSRP: $52.60
You Save: $40.73 (78%)
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Pontiac Grand Prix | GT 4 DOOR, GTP 4 DOOR | 6 Cyl 3.8L
View related parts
Pontiac Grand Prix Filter,Fuel
Part Number: 560355
Product Specifications
- Other Name: FILTER, Fuel; Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, LE 2 DOOR, STATION WAGON | 8 Cyl 5.7L Diesel
View related parts
Pontiac Grand Prix Filter,Fuel
Part Number: 25011603
Product Specifications
- Other Name: FILTER, Engine Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, LE 2 DOOR, STATION WAGON | 8 Cyl 5.7L Diesel

Pontiac Grand Prix Fuel Filter Parts Questions & Experts Answers

Filter,Fuel
25121293
Q: How to replace a fuel filter in a Pontiac Grand Prix?
A: Relieve the fuel system pressure. Raise the vehicle and support it securely on jackstands. Unscrew the fuel line-to-fuel filter fittings. Use a back-up wrench on the fuel filter side of the fitting; use a flare-nut wrench to unscrew the outer nut. Use a back-up wrench to keep from twisting the line. If the car is equipped with plastic "quick-connect" fittings, squeeze the tabs on the fitting and pull it apart. If the car is equipped with metal quick-connect fittings, pull back the rubber boot and twist the fitting one-quarter turn to loosen any dirt. Then, if compressed air is available, blow the dirt away from the connection. Use a special fuel line separator tool to disconnect the fitting. Remove the filter from the clip. Snap the new filter securely into the clip. Make sure the arrow on the filter points toward the engine. Using new O-rings, reattach the fuel lines to the filter. Apply a few drops of clean engine oil to the O-rings to ease reassembly.