How to replace a universal joint on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove a universal joint, it will vary depending on whether it is an outer snap-ring type or an injected plastic type. The snap rings are then removed with pliers, and force out the bearing caps. The U-joint is then removed and replaced with a new one and the bearing cap bores are inspected. For the injected plastic type, the snap-rings are removed if the joint has been rebuilt. Reassembly is the same as for the outer snap-ring joint, except the snap-rings are on the inner part of each bearing cap. If the joint is stiff after assembly, the yoke ears can be struck with a hammer to free up the joint.

What is a driveshaft and Universal Joint and how do you inspect it on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

A driveshaft is a tube or pair of tubes that transmits power between the transmission and differential, with universal joints located at either end and in the center of two-piece driveshafts. Single piece driveshafts have a splined yoke at the front that allows for movement during vehicle operation, while two-piece driveshafts have a slip joint on the front of the rear section and a center support bearing. The driveshaft assembly requires little service, with universal joints lubricated for life and replaced if problems arise. Inspection involves checking for dents, cracks, and oil leakage, as well as ensuring proper operation of universal joints and center bearings. Driveshaft mounting bolts should also be checked for tightness, and similar checks should be performed on the front driveshaft and driveaxles of 4WD models. Noise or vibration while driving may indicate problems with the driveshaft or other components.

Genuine GMC Yukon Universal Joint

U-Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Universal Joints found

View related parts
GMC Yukon Joint Kit, Front Axle Propeller Shaft Front Universal
Part Number: 23104840
$50.13 MSRP: $87.24
You Save: $37.11 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint; Universal Joint
- Position: Front
- Replaces: 12471502, 12479126, 26042371
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2020 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 3/4 TON, 4 DOOR, 4 DOOR SUV, CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, XL 1/2 TON, XL 3/4 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex, 8 Cyl 6.5L Diesel, 8 Cyl 8.1L
View related parts
GMC Yukon Joint Kit,Front Axle Propeller Shaft Universal
Part Number: 89059111
$155.48 MSRP: $259.63
You Save: $104.15 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint; Slip Yoke, Universal Joint
- Position: Front
- Replaces: 12472409, 12476231, 12471503, 12522048, 26049843, 88982758, 88964507, 94772179, 12476230
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2020 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 3/4 TON, 4 DOOR, XL 3/4 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Joint Kit,Front Axle Propeller Shaft Universal
Part Number: 88964413
$93.13 MSRP: $234.36
You Save: $141.23 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint; Universal Joint
- Position: Front
- Replaces: 12385742, 12472406, 15599179, 19256729, 88982759, 12478057, 12471510, 12476310
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2020 GMC Yukon | 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 3/4 TON, 4 DOOR, 4 DOOR SUV, XL 3/4 TON | 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L
- 2001-2006 GMC Yukon | 3/4 TON, XL 3/4 TON | 8 Cyl 8.1L
View related parts
GMC Yukon Joint Kit,Propeller Shaft Universal (1415 Series)
Part Number: 19256729
$34.23 MSRP: $234.36
You Save: $200.13 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint; Universal Joint
- Replaced by: 88964413
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2020 GMC Yukon | 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 3/4 TON, 4 DOOR, 4 DOOR SUV | 8 Cyl 5.3L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L
View related parts
GMC Yukon Joint Kit,Propeller Shaft Rear Universal
Part Number: 89040245
$96.28 MSRP: $162.29
You Save: $66.01 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint; Universal Joint
- Position: Rear
- Replaces: 12472402, 12543576, 15577432, 12476136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon | 1/2 TON, XL 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L
View related parts
GMC Yukon Joint Kit,Propeller Shaft Front Universal
Part Number: 89040243
$98.06 MSRP: $162.29
You Save: $64.23 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint; Universal Joint
- Position: Front
- Replaces: 12543573, 12473124, 12476135
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon | 1/2 TON, XL 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L
View related parts
GMC Yukon Joint Kit, Front Axle Propeller Shaft Front Universal
Part Number: 94772179
$155.48 MSRP: $259.63
You Save: $104.15 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint; Universal Joint
- Position: Front
- Replaced by: 89059111
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR | 8 Cyl 5.3L
View related parts
GMC Yukon Joint Kit,Propeller Shaft
Part Number: 12545628
$42.55 MSRP: $85.80
You Save: $43.25 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Propeller Shaft Universal Joint
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 GMC Yukon | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 6.5L Diesel
View related parts
GMC Yukon Joint Kit, Prop Shf Universal
Part Number: 84712242
$113.74 MSRP: $197.94
You Save: $84.20 (43%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: U-Joint, Universal Joint
- Replaced by: 84807275
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Yukon | , 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L

GMC Yukon Universal Joint

The Universal Joint (U Joint) in GMC Yukon vehicles is responsible for connecting the driveshaft to the axle assembly with some degree of freedom for the required pivoting because of the changes in the suspension due to road condition. This mechanisms works to provide compensation for changes in the angle between parts and in effect provides for the efficient transfer of power. Normally, the GMC Yukons come equipped with Universal Joint at both the forward and backward end of the driveshaft connecting it to the transmission slip yoke and the differential yoke, respectively. Using a cross and needle bearings and enclosed in hardened steel cups, the Universal Joint cannot be regarded a weak link in the power train. Standard Universal Joints come pre-greased when installed at the factory while Grease zerks are provided in those that are bought after the vehicle manufacture. Through the years, GMC has used different Universal Joint styles were primarily distinguished according to lubrication facilities and maintenance possibilities. The problems associated with Worn Universal Joints are noticeable signs, for instance, loud knocking noise and vibration, and therefore, should be replaced to optimise the performance of the vehicle.

Each OEM GMC Yukon Universal Joint we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Yukon Universal Joint Parts Questions & Experts Answers

Joint Kit,Front Axle Propeller Shaft Universal
89059111
Q: How to replace a universal joint on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove a universal joint, it will vary depending on whether it is an outer snap-ring type or an injected plastic type. The snap rings are then removed with pliers, and force out the bearing caps. The U-joint is then removed and replaced with a new one and the bearing cap bores are inspected. For the injected plastic type, the snap-rings are removed if the joint has been rebuilt. Reassembly is the same as for the outer snap-ring joint, except the snap-rings are on the inner part of each bearing cap. If the joint is stiff after assembly, the yoke ears can be struck with a hammer to free up the joint.
Joint Kit, Front Axle Propeller Shaft Front Universal
23104840
Q: What is a driveshaft and Universal Joint and how do you inspect it on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: A driveshaft is a tube or pair of tubes that transmits power between the transmission and Differential, with universal joints located at either end and in the center of two-piece driveshafts. Single piece driveshafts have a splined yoke at the front that allows for movement during vehicle operation, while two-piece driveshafts have a slip joint on the front of the rear section and a center support bearing. The driveshaft assembly requires little service, with universal joints lubricated for life and replaced if problems arise. Inspection involves checking for dents, cracks, and oil leakage, as well as ensuring proper operation of universal joints and center bearings. Driveshaft mounting bolts should also be checked for tightness, and similar checks should be performed on the front driveshaft and driveaxles of 4WD models. Noise or vibration while driving may indicate problems with the driveshaft or other components.