How do you remove the upper control arm on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove the upper control arm on a vehicle, first loosen the wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands. Remove the wheel and position a floor jack under the lower control arm to take the spring pressure off the upper control arm. Mark the relationship of the adjusting cams to the brackets on the frame and unbolt the brake hose/wheel speed sensor bracket from the upper control arm. If working on a 4WD model, remove the driveaxle. To disconnect the upper control arm from the steering knuckle, loosen the upper balljoint nut a few turns, install a puller or ball joint separator, and break the ball joint loose from the knuckle. Remove the nut and upper control arm pivot bolts and nuts, noting which way the bolts are installed. To install the new upper control arm, position the arm in the frame brackets and install the bolts and nuts, but don't tighten them yet. Attach the ball joint to the steering knuckle, install a new nut, and tighten it to the torque specifications. The remainder of installation is the reverse of removal. Make sure the marks made prior to disassembly are aligned, then tighten the nuts to the torque specifications. Finally, tighten the wheel lug nuts to the torque specifications and have the front-end alignment checked and, if necessary, adjusted.

How to remove and install a lower control arm on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove and install a lower control arm on a vehicle, first loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands placed under the frame rails. Disconnect the stabilizer bar link from the control arm and remove the shock absorber lower mounting fasteners. On 4WD models, remove the front driveaxle. If working on a model with torsion bar front suspension, remove the torsion bar. Using rope or wire, support the upper control arm and steering knuckle from the top of the shock absorber. To disconnect the lower control arm from the steering knuckle, loosen the ball joint nut a few turns, install a ball joint separator and break the ball joint loose from the knuckle, then remove the nut. Remove the lower control arm pivot bolts and nuts, noting which way the bolts are installed and, on 4WD models, how the washers are installed. Pull the lower arm from its frame brackets. To install the arm, position it in the frame brackets and install the bolts and nuts, but don't tighten them yet. Attach the balljoint to the steering knuckle, install a new nut, and tighten it to the torque specifications. The remainder of installation is the reverse of removal. Be sure to tighten all fasteners to the torque specifications. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the torque specifications. If working on a model with torsion bar front suspension, be sure to check and adjust the ride height. Have the front-end alignment checked and, if necessary, adjusted.

Genuine GMC Yukon Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Control Arms found

View related parts
GMC Yukon Front Upper Control Arm Assembly
Part Number: 84628487
$145.40 MSRP: $253.08
You Save: $107.68 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Upr Cont; Upper Control Arm
- Position: Front Upper
- Replaces: 22840983, 23125968, 84479374, 23420263, 84304206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Upper Control Arm Assembly
Part Number: 84628488
$169.72 MSRP: $295.41
You Save: $125.69 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Upr Cont; Upper Control Arm
- Position: Front Upper
- Replaces: 84479375, 23420264, 23125969, 84304207
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 84114506
$217.36 MSRP: $378.31
You Save: $160.95 (43%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Replaces: 22853474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 84114505
$217.36 MSRP: $378.31
You Save: $160.95 (43%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Replaces: 22853473, 22994468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Yukon Rear Lower Control Arm Assembly
Part Number: 22868629
$50.42 MSRP: $87.75
You Save: $37.33 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Rear Axle Lower Control; Lower Control Arm
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2020 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV, XL 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex, 8 Cyl 8.1L
View related parts
GMC Yukon Rear Upper Control Arm Assembly
Part Number: 20917465
$44.63 MSRP: $88.57
You Save: $43.94 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Rear Axle Upper Control ; Arm, Rear Axle Control Arm; Upper Control Arm
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2020 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Upper Control Arm Assembly
Part Number: 25812725
$179.70 MSRP: $308.14
You Save: $128.44 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Upper Control ; Arm, Steering Knuckle Upper & Lower Control; Upper Control Arm
- Position: Front Upper
- Replaces: 15096197
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Upper Control Arm Assembly
Part Number: 25812726
$179.70 MSRP: $308.14
You Save: $128.44 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Upper Control ; Arm, Steering Knuckle Upper & Lower Control; Upper Control Arm
- Position: Front Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Upper Control Arm Assembly
Part Number: 25905442
$159.69 MSRP: $277.93
You Save: $118.24 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Upper Control ; Arm, Steering Knuckle Upper & Lower Control; Upper Control Arm
- Position: Front Upper
- Replaces: 15224737, 15110013, 15049881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 GMC Yukon | 3/4 TON, XL 3/4 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 8.1L
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 20869201
$304.06 MSRP: $529.19
You Save: $225.13 (43%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Replaces: 25868823, 15948967, 22952193, 25788114
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 GMC Yukon | 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV | 8 Cyl 5.3L, 8 Cyl 6.2L
- 2007-2014 GMC Yukon | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Upper Control Arm Assembly
Part Number: 25793550
$216.80 MSRP: $377.33
You Save: $160.53 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Upper Control ; Arm, Steering Knuckle Upper & Lower Control; Upper Control Arm
- Position: Front Upper
- Replaces: 15049879
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Yukon | XL 3/4 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.7L, 8 Cyl 6.0L
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 20869202
$304.06 MSRP: $529.19
You Save: $225.13 (43%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Replaces: 15948968, 22952194, 25788115, 25868824
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 GMC Yukon | 1/2 TON, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Upper Control Arm Assembly
Part Number: 25793553
$216.80 MSRP: $377.33
You Save: $160.53 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Upper Control ; Arm, Steering Knuckle Upper & Lower Control; Upper Control Arm
- Position: Front Upper
- Replaces: 12475482, 15049880
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Yukon | XL 3/4 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.7L, 8 Cyl 6.0L
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 20832022
$573.01 MSRP: $812.10
You Save: $239.09 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Replaces: 12475475, 15103878, 25909326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 GMC Yukon | 3/4 TON, XL 3/4 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 8.1L
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 25997510
$369.07 MSRP: $610.86
You Save: $241.79 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control ; Arm, Steering Knuckle Upper & Lower Control; Lower Control Arm
- Position: Front Lower
- Replaces: 25997508, 25788111
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 20832023
$573.01 MSRP: $812.10
You Save: $239.09 (30%)

Out of Stock
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Replaces: 15103879, 25909327, 12475476
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 GMC Yukon | 3/4 TON, XL 3/4 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 8.1L
View related parts
GMC Yukon ARM ASM-FRT LWR CONT
Part Number: 85662942
$107.82 MSRP: $187.66
You Save: $79.84 (43%)
ADD TO CART
Product Specifications
- Other Name: Lower Control Arm
- Position: Lower
- Replaces: 84973286, 84729618
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Yukon | , 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Yukon Arm Assembly, Rear Susp Trailing
Part Number: 84591014
$50.42 MSRP: $126.89
You Save: $76.47 (61%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Trailing Arm
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Yukon | , 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 84114507
$197.24 MSRP: $343.30
You Save: $146.06 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 GMC Yukon | 1500 4 DOOR UTILITY | 8 Cyl 6.2L
View related parts
GMC Yukon Front Lower Control Arm Assembly
Part Number: 84114508
$197.24 MSRP: $343.30
You Save: $146.06 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Lower Control; Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 GMC Yukon | 1500 4 DOOR UTILITY | 8 Cyl 6.2L

| Page 1 of 3 |Next >

1-20 of 50 Results

GMC Yukon Control Arm

The Control Arm of GMC Yukon vehicles is an intermediary part with the frame and wheels, that sustains other elements such as the shock absorber and spring. These arms rotate in accordance with the road conditions; in this way, the wheels can be lowered and raised. As for the different varieties of control arms, it is possible to designate that they all have bushings where they are connected to the frame and ball joints where they are connected to the knuckle or axle. Yukon models in more recent years released, control arms could be made from cast iron or aluminum creating strength with or without the added lightness. These components are crucial for ensuring right tracking of the wheels, correct road feel and effective wear of the tires so vital while handling the car spiritedly or when using it in rough terrains. Addition performance control arms are offered to those who want more strength and manageability of the alignment and turn adjustments for faster speed or leveled suspension changes.

Each OEM GMC Yukon Control Arm we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Yukon Control Arm Parts Questions & Experts Answers

Front Upper Control Arm Assembly
25812726
Q: How do you remove the upper control arm on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the upper control arm on a vehicle, first loosen the wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands. Remove the wheel and position a floor jack under the lower control arm to take the spring pressure off the upper control arm. Mark the relationship of the adjusting cams to the brackets on the frame and unbolt the brake hose/wheel speed sensor bracket from the upper control arm. If working on a 4WD model, remove the driveaxle. To disconnect the upper control arm from the Steering Knuckle, loosen the upper balljoint nut a few turns, install a puller or ball joint separator, and break the ball joint loose from the knuckle. Remove the nut and upper control arm pivot bolts and nuts, noting which way the bolts are installed. To install the new upper control arm, position the arm in the frame brackets and install the bolts and nuts, but don't tighten them yet. Attach the ball joint to the steering knuckle, install a new nut, and tighten it to the torque specifications. The remainder of installation is the reverse of removal. Make sure the marks made prior to disassembly are aligned, then tighten the nuts to the torque specifications. Finally, tighten the wheel lug nuts to the torque specifications and have the front-end alignment checked and, if necessary, adjusted.
Front Lower Control Arm Assembly
20832022
Q: How to remove and install a lower control arm on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove and install a lower control arm on a vehicle, first loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands placed under the frame rails. Disconnect the stabilizer bar link from the control arm and remove the shock absorber lower mounting fasteners. On 4WD models, remove the front driveaxle. If working on a model with Torsion Bar front suspension, remove the torsion bar. Using rope or wire, support the upper control arm and Steering Knuckle from the top of the shock absorber. To disconnect the lower control arm from the steering knuckle, loosen the ball joint nut a few turns, install a ball joint separator and break the ball joint loose from the knuckle, then remove the nut. Remove the lower control arm pivot bolts and nuts, noting which way the bolts are installed and, on 4WD models, how the washers are installed. Pull the lower arm from its frame brackets. To install the arm, position it in the frame brackets and install the bolts and nuts, but don't tighten them yet. Attach the balljoint to the steering knuckle, install a new nut, and tighten it to the torque specifications. The remainder of installation is the reverse of removal. Be sure to tighten all fasteners to the torque specifications. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the torque specifications. If working on a model with torsion bar front suspension, be sure to check and adjust the ride height. Have the front-end alignment checked and, if necessary, adjusted.