How to check and replace ball joints in Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's suspension system?

To test the upper ball joint, detach it from the steering knuckle and check for looseness or use a dial indicator to measure deflection. The upper arm should be replaced if the reading is above 0.079 inches. Examine the lower ball joint for any looseness, or use a dial indicator to measure its deflection. Replace the ball joint if your measurement exceeds 0.079 inches. Demounting of lower ball joint requires control arm removal and knocking back crimped areas with a hammer and chisel. To attach it, shove the new ball joint into position within control arm and stake or crimp it down tightly. The whole upper control usually goes with an upper ball joints hence should be replaced as such because they are inseparable from one another by design. Check front-end alignment and adjust accordingly as required.

Genuine GMC Yukon Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Ball Joints found

View related parts
GMC Yukon Stud Kit,Front Lower Control Arm Ball
Part Number: 19209396
$64.34 MSRP: $111.99
You Save: $47.65 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: STUD KIT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Replaces: 15922557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 GMC Yukon | 1500 4 DOOR UTILITY | 8 Cyl 6.2L
- 2007-2014 GMC Yukon | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Stud Assembly, Front Lower Control Arm Ball
Part Number: 22855747
$42.01 MSRP: $73.13
You Save: $31.12 (43%)
ADD TO CART
Product Specifications
- Other Name: JOINT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Replaces: 23125970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Yukon | 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR, 4 DOOR SUV | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Yukon Stud Kit,Front Lower Control Arm Ball
Part Number: 19207137
$70.21 MSRP: $122.20
You Save: $51.99 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: STUD KIT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Replaces: 12472820, 12475477
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 GMC Yukon | 3/4 TON, XL 3/4 TON | 8 Cyl 6.0L, 8 Cyl 6.0L Flex
- 2000-2002 GMC Yukon | XL 3/4 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 8.1L
View related parts
GMC Yukon Stud Kit,Front Lower Control Arm Ball
Part Number: 19256481
$38.52 MSRP: $63.73
You Save: $25.21 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: STUD KIT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
GMC Yukon Stud Kit,Front Lower Control Arm Ball
Part Number: 12475478
$114.84 MSRP: $161.18
You Save: $46.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: STUD KIT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Replaces: 12472819
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon | 1/2 TON, XL 1/2 TON, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 8.1L
View related parts
GMC Yukon STUD KIT,FRT LWR CONT ARM BALL
Part Number: 19416898
$37.96 MSRP: $76.54
You Save: $38.58 (51%)
ADD TO CART
Product Specifications
- Other Name: Lower Ball Joint
- Position: Lower
- Replaces: 12380415, 12383410
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC Yukon | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.5L Diesel
View related parts
GMC Yukon Stud Kit,Front Lower Control Arm Ball
Part Number: 15687079
$43.39 MSRP: $88.75
You Save: $45.36 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: STUD KIT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 GMC Yukon | CLASSIC 2 DOOR 1/2 TON | 8 Cyl 5.7L, 8 Cyl 6.5L Diesel
View related parts
GMC Yukon STUD KIT,FRT LWR CONT ARM BALL
Part Number: 19416896
$83.32 MSRP: $137.88
You Save: $54.56 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lower Ball Joint
- Position: Lower
- Replaces: 12480852, 15659724
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 GMC Yukon | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L, 8 Cyl 6.5L Diesel
View related parts
GMC Yukon STUD KIT,FRT UPR CONT ARM BALL
Part Number: 19416903
Product Specifications
- Other Name: Upper Ball Joint
- Replaces: 15969282, 15659447
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Yukon | CLASSIC 4 DOOR 1/2 TON
- 1995-1997 GMC Yukon | CLASSIC 4 DOOR 1/2 TON
View related parts
GMC Yukon Stud Kit,Front Lower Control Arm Ball
Part Number: 15743845
Product Specifications
- Other Name: STUD KIT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Replaces: 15016744
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Yukon | XL 3/4 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.7L, 8 Cyl 6.0L
View related parts
GMC Yukon STUD KIT,FRT UPR CONT ARM BALL
Part Number: 19416901
Product Specifications
- Replaces: 15687080
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L, 8 Cyl 6.5L Diesel

GMC Yukon Ball Joint

The Ball Joint of GMC Yukon vehicles is an important component that links control arms to the steering knuckle permitting the latter to rotate only, but not translate. Usual made from steel, a ball joint contains a bearing stud and socket that is sealed in protective rubber-like boot for minimizing the influence of dirt and facilitating lubricant circulation. These components have largely displaced the old kingpin design as it provides them with more caster and camber angle adjustability without the inclusion of the unwanted flexibility thus refining the vehicle handling, stability, and ride comfort. Contemporary ball joints feature one of the following constructions: they are lubricated once and for all during production; they incorporate improved bearing design, as well as improved staphyloma seals of dust boote for increased time between major services.

Each OEM GMC Yukon Ball Joint we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Yukon Ball Joint Parts Questions & Experts Answers

Stud Kit,Front Lower Control Arm Ball
19256481
Q: How to check and replace ball joints in Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's suspension system?
A: To test the upper ball joint, detach it from the Steering Knuckle and check for looseness or use a dial indicator to measure deflection. The upper arm should be replaced if the reading is above 0.079 inches. Examine the lower ball joint for any looseness, or use a dial indicator to measure its deflection. Replace the ball joint if your measurement exceeds 0.079 inches. Demounting of lower ball joint requires Control Arm removal and knocking back crimped areas with a hammer and chisel. To attach it, shove the new ball joint into position within control arm and stake or crimp it down tightly. The whole upper control usually goes with an upper ball joints hence should be replaced as such because they are inseparable from one another by design. Check front-end alignment and adjust accordingly as required.