How to replace a left-side CMP sensor on Buick Enclave,Chevrolet Traverse and GMC Acadia?

Four CMP sensors are located on the cylinder heads' front. To replace a left-side sensor, drain the engine coolant, support the engine with a floor jack, remove the engine mount strut, bracket, radiator inlet hose, and power steering reservoir bolts. Move the reservoir aside, disconnect the CMP sensor connector, remove the sensor mounting bolt and the sensor. Reinstall in reverse order and refill the cooling system if drained.

Genuine Chevrolet Traverse Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Camshaft Position Sensors found

View related parts
Chevrolet Traverse Sensor Assembly, Camshaft Position
Part Number: 12684186
$16.32 MSRP: $33.88
You Save: $17.56 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Cm/Shf Posn; Camshaft Position Sensor, Camshaft Sensor
- Replaces: 12615371
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2024 Chevrolet Traverse | 1LT/2LT EXTENDED 4 DOOR SUV, 1LZ/2LZ EXTENDED 4 DOOR SUV, LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV, SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Sensor Assembly, Camshaft Position
Part Number: 12638266
$34.93 MSRP: $72.55
You Save: $37.62 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Camshaft Position Sensor, Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | LT EXTENDED 4 DOOR SUV | 4 Cyl 2.0L
View related parts
Chevrolet Traverse Sensor Assembly, Camshaft Position
Part Number: 12608424
$39.10 MSRP: $73.78
You Save: $34.68 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Camshaft Position Sensor, Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Chevrolet Traverse Camshaft Position Sensor

Camshaft Position Sensor located in Chevrolet Traverse cars is used as a significant indicator of the camshaft position and its speed-transmitting data to the engine control module to control fuel injectors and ignition timing. Usually, it fastens to the upper side of the camshaft, but the positioning for the different automobile models may be different. The Camshaft Position Sensor works hand-in-hand with the crank sensor to regulate the other components of a car's engine to the optimal performing levels, regulate fuel injection and to measure the engine speed. This is very important for proper running of the engine and eradicating cases of poor performance occasioned by damaged sensors.

Each OEM Chevrolet Traverse Camshaft Position Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Traverse Camshaft Position Sensor Parts Questions & Experts Answers

Sensor Assembly, Camshaft Position
12608424
Q: How to replace a left-side CMP sensor on Buick Enclave,Chevrolet Traverse and GMC Acadia?
A: Four CMP sensors are located on the cylinder heads' front. To replace a left-side sensor, drain the engine coolant, support the engine with a floor jack, remove the engine mount strut, bracket, radiator inlet hose, and power steering reservoir bolts. Move the reservoir aside, disconnect the CMP sensor connector, remove the sensor mounting bolt and the sensor. Reinstall in reverse order and refill the cooling system if drained.