How to remove and install the steering gear?

To remove the rack and pinion, start by loosening the front wheel lug nuts and raising the front of the vehicle on jackstands. Remove the wheels and the under-vehicle splash shield, as well as the skid plate bolts and skid plate if applicable. Remove the rack and pinion crossmember and mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft before removing the pinch bolt. Detach the tie-rod ends from the steering knuckles and position a drain pan under the rack and pinion. Remove the bolt securing the power steering pressure and return lines, and cap the lines to prevent leakage. Finally, unscrew the mounting nuts, remove the washers, and slide the bolts out to lower the rack and pinion from the vehicle. To install the rack and pinion, reverse the removal steps and ensure all fasteners are tightened to the specified torque. Tighten the wheel lug nuts to the torque specifications, check the power steering fluid level, add some if necessary, and bleed the system.

Genuine Chevrolet Trailblazer Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Rack And Pinions found

View related parts
Chevrolet Trailblazer Gear Assembly, Rack & Pinion Strg
Part Number: 42745904
$178.43 MSRP: $310.54
You Save: $132.11 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Rack, Steering Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chevrolet Trailblazer | 4 DOOR EXT, LEVEL II 4 DOOR EXTENDED, LEVEL III 4DOOR EXTENDED, LEVEL IV 4 DOOR EXTENDED, LEVEL V 4 DOOR EXTENDED | 3 Cyl 1.2L, 3 Cyl 1.3L
View related parts
Chevrolet Trailblazer Gear Assembly, Rack & Pinion Strg
Part Number: 42745903
$900.81 MSRP: $1430.16
You Save: $529.35 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Rack
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Trailblazer | 4 DOOR EXT | 3 Cyl 1.2L, 3 Cyl 1.3L
View related parts
Chevrolet Trailblazer GEAR ASM-RACK & PINION STRG
Part Number: 42796291
$174.41 MSRP: $275.67
You Save: $101.26 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024-2025 Chevrolet Trailblazer | LEVEL V 4 DOOR EXTENDED | 3 Cyl 1.2L, 3 Cyl 1.3L
View related parts
Chevrolet Trailblazer Gear Kit,Steering (Remanufacture)
Part Number: 19330446
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26100285, 88967181
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Trailblazer | 4 DOOR EXT | 6 Cyl 4.2L, 8 Cyl 5.3L
View related parts
Chevrolet Trailblazer Gear Kit,Steering (Remanufacture)
Part Number: 19330462
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 19207780, 26101416, 88965356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | 4 DOOR | 6 Cyl 4.2L, 8 Cyl 5.3L
View related parts
Chevrolet Trailblazer Gear Kit,Steering (Remanufacture)
Part Number: 19330461
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 19207782, 19150430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | 4 DOOR | 8 Cyl 6.0L
View related parts
Chevrolet Trailblazer Gear Kit,Steering (Remanufacture)
Part Number: 19330443
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26089516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Trailblazer | 4 DOOR | 6 Cyl 4.2L

Chevrolet Trailblazer Rack And Pinion

Chevrolet Trailblazer's Rack And Pinion is an important supplier that converts the rotational movement of the steering wheel into the side motion of the front wheels. This is done through arrangement of a pinion gear which is in contact with the rack gear which is housed in a metallic tube that has been fixed on the chassis. Nearly all the contemporary Trailblazer automobiles come equipped with power assisted, rack and pinion steering with hydraulic power steering being responsible for supplying pressurized fluid to help shift the rack from left to right within the tube. Problems with the Steering Rack are caused by O-ring seals that wear out, leakage of the hydraulic system, or wear of the gears is accompanied by signs such as tight steering, metallic sound, and instability. Steering wheel play and the situation when the vehicle pulls to one side can indicate the need for rack and pinion replacement. There might be issues pertaining to this component but the rack and pinion system in Chevrolet Trailblazer cars maintains the accurate control and strong feel of the steering wheel which is crucial for the safety of the passengers and driver.

Each OEM Chevrolet Trailblazer Rack And Pinion we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Trailblazer Rack And Pinion Parts Questions & Experts Answers

Gear Kit,Steering (Remanufacture)
19330462
Q: How to remove and install the steering gear?
A: To remove the rack and pinion, start by loosening the front wheel lug nuts and raising the front of the vehicle on jackstands. Remove the wheels and the under-vehicle splash shield, as well as the skid plate bolts and skid plate if applicable. Remove the rack and pinion crossmember and mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft before removing the pinch bolt. Detach the tie-rod ends from the steering knuckles and position a drain pan under the rack and pinion. Remove the bolt securing the power steering pressure and return lines, and cap the lines to prevent leakage. Finally, unscrew the mounting nuts, remove the washers, and slide the bolts out to lower the rack and pinion from the vehicle. To install the rack and pinion, reverse the removal steps and ensure all fasteners are tightened to the specified torque. Tighten the wheel lug nuts to the torque specifications, check the power steering fluid level, add some if necessary, and bleed the system.