How do you remove and install rear stabilizer bar and stabilizer bar bushing?

To remove the sway bar kit, start by loosening the rear wheel lug nuts and raising the rear of the vehicle. Support it securely on jackstands and block the front wheels to prevent rolling. Remove the rear wheels. Then, remove the sway bar kit link-to-frame nuts/bolts and the nuts from the lower ends of the links. Separate the links from the bar. Finally, remove the sway bar kit by removing the clamp nuts. To install the sway bar kit, inspect the sway bar bushings and link bushings for any signs of deterioration and replace them if necessary. Then, follow the reverse order of removal, making sure to tighten all fasteners to the specified torque.

How do you remove the front stabilizer bar and stabilizer bar bushing?

Raise the vehicle and support it securely on jackstands. Remove the nuts from the links and remove the links. Remove the sway bar kit clamp bolts. Remove the sway bar kit. Remove the rubber bushings, noting which way the slits are facing. Inspect all parts for wear and damage. Installation is otherwise the reverse of removal. Be sure to tighten all fasteners to the torque specifications.

Genuine Chevrolet Trailblazer Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bar Bushings found

View related parts
Chevrolet Trailblazer Insulator,Front Stabilizer Shaft
Part Number: 15128365
$8.16 MSRP: $15.40
You Save: $7.24 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: INSULATOR, Stabilizer Shaft; Bushing, Stabilizer Bar Bushing
- Position: Front
- Replaces: 15102672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 6 Cyl 4.2L, 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Chevrolet Trailblazer Insulator,Rear Stabilizer Shaft
Part Number: 15070009
$7.93 MSRP: $14.96
You Save: $7.03 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: INSULATOR, Stabilizer Shaft; Bushing, Stabilizer Bar Insulator
- Position: Rear
- Replaces: 15159602
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 6 Cyl 4.2L, 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Chevrolet Trailblazer Insulator,Front Stabilizer Shaft
Part Number: 15001092
$12.60 MSRP: $13.70
You Save: $1.10 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: INSULATOR, Stabilizer Shaft; Bushing, Stabilizer Bar Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet Trailblazer | 4 DOOR | 6 Cyl 4.2L, 8 Cyl 5.3L
View related parts
Chevrolet Trailblazer INSULATOR
Part Number: 15164283
Product Specifications
- Other Name: INSULATOR, Stabilizer Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet Trailblazer | 4 DOOR EXT | 6 Cyl 4.2L, 8 Cyl 5.3L
View related parts
Chevrolet Trailblazer Insulator,Front Stabilizer Shaft
Part Number: 15001095
Product Specifications
- Other Name: INSULATOR, Stabilizer Shaft; Bushing, Stabilizer Bar Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 6 Cyl 4.2L, 8 Cyl 5.3L
View related parts
Chevrolet Trailblazer Insulator,Front Stabilizer Shaft
Part Number: 15125531
Product Specifications
- Other Name: INSULATOR, Stabilizer Shaft; Bushing, Stabilizer Bar Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 6 Cyl 4.2L, 8 Cyl 5.3L, 8 Cyl 6.0L

Chevrolet Trailblazer Sway Bar Bushing

The Sway Bar Bushing part in the Chevrolet Trailblazer helps control the stability as well as the handling of the car since it has the responsibility of fixing the sway bar in position. When the these bushings wear out, the sway bar can come loose and thus endanger the safety and performance of the car. To have the optimal experience while driving, it is recommended that one carries out routine check up of vehicles with particular emphasis on the Sway Bar Bushings and replacement of those that have worn out. It appears that over the years several variations of sway bar bushings may have been incorporated in the Trailblazer models in an effort to tweak the structural characteristics with an ulterior motive of improving the over assets of the Trailblazer.

Each OEM Chevrolet Trailblazer Sway Bar Bushing we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Trailblazer Sway Bar Bushing Parts Questions & Experts Answers

INSULATOR
15164283
Q: How do you remove and install rear stabilizer bar and stabilizer bar bushing?
A: To remove the sway bar kit, start by loosening the rear wheel lug nuts and raising the rear of the vehicle. Support it securely on jackstands and block the front wheels to prevent rolling. Remove the rear wheels. Then, remove the sway bar kit link-to-frame nuts/bolts and the nuts from the lower ends of the links. Separate the links from the bar. Finally, remove the sway bar kit by removing the clamp nuts. To install the sway bar kit, inspect the sway bar bushings and link bushings for any signs of deterioration and replace them if necessary. Then, follow the reverse order of removal, making sure to tighten all fasteners to the specified torque.
Insulator,Front Stabilizer Shaft
15125531
Q: How do you remove the front stabilizer bar and stabilizer bar bushing?
A: Raise the vehicle and support it securely on jackstands. Remove the nuts from the links and remove the links. Remove the sway bar kit clamp bolts. Remove the sway bar kit. Remove the rubber bushings, noting which way the slits are facing. Inspect all parts for wear and damage. Installation is otherwise the reverse of removal. Be sure to tighten all fasteners to the torque specifications.