My Garage
My Account
Cart
Genuine Chevrolet Monte Carlo Brake Pad
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Brake Pads found
Chevrolet Monte Carlo Pad Kit,Rear Disc Brake
Part Number: 19149251$44.74 MSRP: $126.84You Save: $82.10 (65%)
Chevrolet Monte Carlo Pad Kit,Front Disc Brake
Part Number: 19152666$68.30 MSRP: $135.52You Save: $67.22 (50%)Ships in 1-2 Business Days
Chevrolet Monte Carlo Pad Kit,Front Disc Brake
Part Number: 19207501$80.53 MSRP: $167.69You Save: $87.16 (52%)
Chevrolet Monte Carlo Pad Kit,Rear Disc Brake
Part Number: 18042417$40.82 MSRP: $115.71You Save: $74.89 (65%)Ships in 1-2 Business Days
Chevrolet Monte Carlo Pad Kit,Front Disc Brake
Part Number: 18029828$32.62 MSRP: $114.00You Save: $81.38 (72%)Ships in 1-2 Business Days
Chevrolet Monte Carlo Pad Kit,Rear Disc Brake
Part Number: 19209340$74.94 MSRP: $134.42You Save: $59.48 (45%)
Chevrolet Monte Carlo Brake Pad
Brake Pad are part of the automobile brake assembly applied to the rotating brake rotors and utilizing friction to decelerate the vehicle, and transfer kinetic energy into heat energy, and Chevrolet Monte Carlo come with brake pads. These pads are usually metallic and synthetic to provide heat resistance, the pads can get up to 400 degrees of heat when in use. The Brake Pads have steel backing plates while the friction material slides on to the rotor to produce the friction required for the braking system. Brake Pad can be classified into Non-metallic, Semi-metallic, metal and ceramic type brake pads having different friction material, wear out features, as well as operating noise. Brake Pads require periodic change that is highlighted by indicators so that drivers can get a new set to enhance efficiency in braking with few complications such as brake fade or extremely worn-out rotors.
Each OEM Chevrolet Monte Carlo Brake Pad we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Monte Carlo Brake Pad Parts Questions & Experts Answers
- Q: How to replace disc brake pads?A: Disc brake pads must be replaced on both front or both rear wheels at the same time-never replace the pads on only one wheel. Also, the dust created by the brake system is harmful to your health. Never blow it out with compressed air and don't inhale any of it. An approved filtering mask should be worn when working on the brakes. Do not, under any circumstances, use petroleum-based solvents to clean brake parts. Use brake system cleaner only! This procedure applies to front and rear disc brakes. Remove the cap from the brake fluid reservoir and remove about two-thirds of the fluid. Brake fluid will damage paint. Cover all painted surfaces around the work area and be careful not to spill fluid during this procedure. Clean any spilled fluid immediately and rinse the area with lots of water. Loosen the wheel lug nuts, raise the end of the vehicle you're working on and support it securely on jack stands. Block the wheels at the opposite end. Remove the wheels. Work on one brake assembly at a time, using the assembled brake for reference if necessary. Inspect the Brake Disc carefully. If machining is necessary, follow the information to remove the disc, at which time the pads can be removed as well. On front brakes and rear brakes with Parking Brake Shoes (instead of actuator-type calipers), push the piston back into its bore to provide room for the new brake pads. A C-clamp can be used to accomplish this. As the piston is depressed to the bottom of the caliper bore, the fluid in the master cylinder will rise. Make sure that it doesn't overflow. If necessary, siphon off some of the fluid. Do not attempt to depress the piston into the caliper on later models with parking brake actuator-type calipers. Once you have installed the new pads, proceed. Install the wheel and lug nuts, lower the vehicle and tighten the lug nuts to the torque. Apply and release the brake pedal several times to bring the pads into contact with the brake discs. Check the brake fluid level and add fluid, if necessary. Check the operation of the brakes in an isolated area before driving the vehicle in traffic.
