How do you remove the stabilizer bar links,stabilizer bar bushing and stabilizer bar on Chevrolet Malibu?

To take down the sway bar kit, first slacken the back wheel lug bolts and obstruct the front wheels to stop the vehicle from moving. After that, lift up the rear end of the car and sustain it firmly on jack stands before removing its back wheels. Then separate rear section of exhaust pipe and parking brake cables from trailing arms. Remove coil springs without unjoining brake calipers from brake hoses. Indicate location of subframe onto chassis and hold subframe with two jacks beneath it. Get rid of all subframe mounting bolts and lower it a little so as to easily reach sway bar kit bracket bolts. Unfasten sway bar links from bar and remove sway bar kit checking if there are any signs of trouble with sway bar bushings. Damaged ones need replacement in case they are damaged by sway bar bushings. Sway bar kit installation requires lubricating them with vegetable oil, replacing all suspension fasteners with new ones, tightening them according to torque specifications properly then finally secure proper torque specifications for brake fasteners and wheel lug nuts.

How do you replace the stabilizer bar links,stabilizer bar bushing and stabilizer bar for Chevrolet Malibu?

To replace the sway bar link, start by loosening the front wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and remove the front wheels. To detach the sway bar link from the strut or the bar, hold the ball stud with an Allen wrench while turning the wrench to loosen and remove the nut. Installation is the reverse of removal, so tighten the nuts to the proper torque specifications. Finally, install the wheels and lug nuts, then lower the vehicle and tighten the wheel lug nuts to the torque. For the sway bar link and sway bar bushings, once the subframe has been removed or lowered sufficiently, remove the sway bar link bracket bolts and separate the bar from the subframe. Installation is the reverse of the removal procedure, so tighten the sway bar link clamp bolts to the torque.

Genuine Chevrolet Malibu Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Sway Bar Kits found

View related parts
Chevrolet Malibu Shaft, Front Stabilizer
Part Number: 22712030
$88.08 MSRP: $116.63
You Save: $28.55 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Replaces: 22595741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Malibu | 4 DOOR, 4 DOOR NOTCHBACK, CLASSIC 4 DOOR NOTCHBACK, LS 4 DOOR, LS 4 DOOR NOTCHBACK, LX 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.1L
View related parts
Chevrolet Malibu Shaft Assembly, Front Stabilizer
Part Number: 84144877
$111.58 MSRP: $176.32
You Save: $64.74 (37%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Stab; Stabilizer Bar
- Position: Front
- Replaces: 23308807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Shaft,Front Stabilizer
Part Number: 20841712
$109.96 MSRP: $173.01
You Save: $63.05 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Malibu | 4 DOOR HYBRID, BASE 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Shaft Assembly, Front Stabilizer
Part Number: 22810904
$109.25 MSRP: $171.90
You Save: $62.65 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Replaces: 20961221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Shaft Assembly, Rear Stabilizer
Part Number: 84228526
$86.78 MSRP: $136.51
You Save: $49.73 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Rear Stab; Stabilizer Bar
- Position: Rear
- Replaces: 84021598, 23294399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L
View related parts
Chevrolet Malibu Shaft Assembly, Rear Stabilizer
Part Number: 13281795
$75.23 MSRP: $118.39
You Save: $43.16 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Shaft,Front Stabilizer
Part Number: 20841711
$84.15 MSRP: $132.39
You Save: $48.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | 4 DOOR HYBRID, BASE 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L
View related parts
Chevrolet Malibu Shaft Assembly, Rear Stabilizer
Part Number: 15294606
$115.86 MSRP: $183.13
You Save: $67.27 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Malibu | SS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 6 Cyl 3.5L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Shaft Assembly, Rear Stabilizer
Part Number: 25816041
$125.33 MSRP: $198.09
You Save: $72.76 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Rear
- Replaces: 15808899, 22673879
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Malibu | 4 DOOR NOTCHBACK, BASE 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, SS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.6L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Shaft Assembly, Rear Stabilizer
Part Number: 84228525
$90.18 MSRP: $141.88
You Save: $51.70 (37%)
Product Specifications
- Other Name: Shaft Assembly, Rear Stab; Stabilizer Bar
- Position: Rear
- Replaces: 23308808, 84021599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Malibu | LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu SHAFT ASM,RR STAB
Part Number: 19417685
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Shaft, Front Stabilizer
Part Number: 15800019
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Replaces: 22727777
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chevrolet Malibu | 4 DOOR HATCHBACK, LS 4 DOOR HATCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 6 Cyl 3.5L
View related parts
Chevrolet Malibu Shaft, Front Stabilizer (25Mm)
Part Number: 459213
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar, Stabilizer Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Chevrolet Malibu | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Malibu Shaft, Rear Stabilizer
Part Number: 22601043
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Malibu | 4 DOOR, 4 DOOR NOTCHBACK, CLASSIC 4 DOOR NOTCHBACK, LS 4 DOOR, LS 4 DOOR NOTCHBACK, LX 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.1L
View related parts
Chevrolet Malibu Shaft,Rear Stabilizer
Part Number: 10029113
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar, Stabilizer Shaft
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Chevrolet Malibu | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Malibu Shaft,Front Stabilizer
Part Number: 19299542
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Replaces: 15234344, 15800017, 22670298
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, 4 DOOR NOTCHBACK, BASE 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 6 Cyl 3.5L

Chevrolet Malibu Sway Bar Kit

Sway Bar Kit for Chevrolet Malibu is meant to improve the car handling by linking the opposite sides of the suspension system. This kit mainly minimizes unwanted lateral body movement in high speed turns and over intreruptions while increasing the overall stability. Anti roll bar works on the principle of not allowing the bar to twist, thus making the wheels of similar heights wherein sideways tilt is reduced and road grip is increased. Depending on the year of the Chevrolet Malibu production, several types of Sway Bar Kits were installed: adjustable and active anti-roll bars. These advanced systems can provide a modulated level of stiffness which is beneficial on the basis of handling and riding comfort. Although conventional solid sway bars enhance the agility, they sometimes pass on impact between wheels making it waddle over rough surfaces. Development of these kits based on the progress in automobile technology, making attempt to achieve driving performance and ride comfort in Chevrolet Malibu.

Each OEM Chevrolet Malibu Sway Bar Kit we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Malibu Sway Bar Kit Parts Questions & Experts Answers

Shaft Assembly, Rear Stabilizer
13281795
Q: How do you remove the stabilizer bar links,stabilizer bar bushing and stabilizer bar on Chevrolet Malibu?
A: To take down the sway bar kit, first slacken the back wheel lug bolts and obstruct the front wheels to stop the vehicle from moving. After that, lift up the rear end of the car and sustain it firmly on jack stands before removing its back wheels. Then separate rear section of exhaust pipe and parking brake cables from trailing arms. Remove Coil Springs without unjoining brake calipers from brake hoses. Indicate location of subframe onto chassis and hold subframe with two jacks beneath it. Get rid of all subframe mounting bolts and lower it a little so as to easily reach sway bar kit bracket bolts. Unfasten sway bar links from bar and remove sway bar kit checking if there are any signs of trouble with sway bar bushings. Damaged ones need replacement in case they are damaged by sway bar bushings. Sway bar kit installation requires lubricating them with vegetable oil, replacing all suspension fasteners with new ones, tightening them according to torque specifications properly then finally secure proper torque specifications for brake fasteners and wheel lug nuts.
Shaft Assembly, Front Stabilizer
22810904
Q: How do you replace the stabilizer bar links,stabilizer bar bushing and stabilizer bar for Chevrolet Malibu?
A: To replace the sway bar link, start by loosening the front wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and remove the front wheels. To detach the sway bar link from the strut or the bar, hold the ball stud with an Allen wrench while turning the wrench to loosen and remove the nut. Installation is the reverse of removal, so tighten the nuts to the proper torque specifications. Finally, install the wheels and lug nuts, then lower the vehicle and tighten the wheel lug nuts to the torque. For the sway bar link and sway bar bushings, once the subframe has been removed or lowered sufficiently, remove the sway bar link bracket bolts and separate the bar from the subframe. Installation is the reverse of the removal procedure, so tighten the sway bar link clamp bolts to the torque.