Make sure this part fits

GM 13281795 Shaft Assembly, Rear Stabilizer

2010-2020 GM

Customer Questions & Expert Answers (5)
GM 13281795 Shaft Assembly, Rear Stabilizer
  • Part Description
    SHAFT, Stabilizer
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$75.23 MSRP: $118.39
You Save: $43.16 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number13281795
    Part DescriptionSHAFT, Stabilizer
    Other NamesStabilizer Bar
    Item Dimensions60.0 x 12.2 x 13.7 inches
    Item Weight44.70 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU13281795
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2015 Buick Allure4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN, SPS 4 DOOR SEDAN
    2010-2016 Buick LaCrosse4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN, SPS 4 DOOR SEDAN
    2012-2017 Buick Regal4 Cyl 2.0L, 4 Cyl 2.4LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN
    2014-2020 Chevrolet Impala4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6LLS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK
    2013-2016 Chevrolet Malibu4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5LLS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 13281795 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the stabilizer bar links,stabilizer bar bushing and stabilizer bar on Chevrolet Malibu? Posted by Customer
    A:
    To take down the sway bar kit, first slacken the back wheel lug bolts and obstruct the front wheels to stop the vehicle from moving. After that, lift up the rear end of the car and sustain it firmly on jack stands before removing its back wheels. Then separate rear section of exhaust pipe and parking brake cables from trailing arms. Remove coil springs without unjoining brake calipers from brake hoses. Indicate location of subframe onto chassis and hold subframe with two jacks beneath it. Get rid of all subframe mounting bolts and lower it a little so as to easily reach sway bar kit bracket bolts. Unfasten sway bar links from bar and remove sway bar kit checking if there are any signs of trouble with sway bar bushings. Damaged ones need replacement in case they are damaged by sway bar bushings. Sway bar kit installation requires lubricating them with vegetable oil, replacing all suspension fasteners with new ones, tightening them according to torque specifications properly then finally secure proper torque specifications for brake fasteners and wheel lug nuts.
    Posted by GMPartsGiant Specialist
    Q:
    What is the installation process for the front stabilizer bar on the 2011 Buick LaCrosse? Posted by Customer
    A:
    During installation, the stabilizer bar and bushings are installed, lubricated with vegetable oil, and positioned with the slit in each bushing facing toward the rear of the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you install the rear stabilizer bar on2009 Buick LaCrosses with RPO GNE rear suspension? Posted by Customer
    A:
    The installation process involves lubricating the bushings, replacing suspension fasteners, and tightening them to the specified torque. Finally, tighten the wheel lug nuts to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do after removing the stabilizer bar link of the 2016 Chevrolet Malibu? Posted by Customer
    A:
    After removing the stabilizer bar link, you should install the wheels and lug nuts, then lower the vehicle and tighten the wheel lug nuts to the proper torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 13281795, the Right Choice

To ensure reliability, purchase GM part # 13281795 Shaft Assembly, Rear Stabilizer. It is sometimes referred to as GM Sway Bar Kit. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Allure, LaCrosse, Regal models. It fits Chevrolet Impala, Malibu.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 13281795 Shaft Assembly, Rear Stabilizer. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly