What should you do if the Malfunction Indicator Light (MIL) comes on after replacing the CKP sensor and starting the engine on Chevrolet Malibu?

If the Malfunction Indicator Light (MIL) comes on after replacing the CKP sensor and starting the engine, drive the vehicle to a dealer or qualified repair shop to have the crankshaft position variation learn procedure performed with a factory scan tool. On 1.5L engines, the CKP sensor is located in the engine block near the flywheel, facing the rear of the vehicle, while on 2.0L and 2.5L engines, it is also located in the engine block near the flywheel, facing the rear, but behind the starter. Begin by raising and supporting the front of the vehicle on jackstands. For 2.0L and 2.5L engines, remove the starter to access the CKP sensor. Disconnect the CKP electrical connector on all models, then remove the CKP sensor mounting bolt and take out the sensor. Inspect the O-ring and replace it if damaged. Installation is the reverse of removal; lubricate the O-ring with a film of clean engine oil and securely tighten the sensor bolt.

Genuine Chevrolet Malibu Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Crankshaft Position Sensors found

View related parts
Chevrolet Malibu Sensor,Crankshaft Position
Part Number: 12567712
$41.61 MSRP: $86.40
You Save: $44.79 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 1103703, 10456295, 24576398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Malibu | CLASSIC 4 DOOR NOTCHBACK | 4 Cyl 2.2L
- 1997-1999 Chevrolet Malibu | 4 DOOR, LS 4 DOOR, LX 4 DOOR | 4 Cyl 2.4L
View related parts
Chevrolet Malibu Sensor,Crankshaft Position
Part Number: 10456555
$21.99 MSRP: $70.71
You Save: $48.72 (69%)
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 10456043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | 4 DOOR, 4 DOOR NOTCHBACK, LS 4 DOOR, LS 4 DOOR NOTCHBACK, LX 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Malibu Sensor,Crankshaft Position
Part Number: 12567648
$90.78 MSRP: $188.47
You Save: $97.69 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 24508212, 10231684, 12550965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | 4 DOOR, 4 DOOR NOTCHBACK, LS 4 DOOR, LS 4 DOOR NOTCHBACK, LX 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Malibu Sensor Assembly, Crankshaft Position
Part Number: 12674703
$32.31 MSRP: $60.96
You Save: $28.65 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Cr/Shf Posn
- Replaces: 12588992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2014 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L
View related parts
Chevrolet Malibu Sensor Assembly, Crankshaft Position
Part Number: 12615626
$16.48 MSRP: $31.12
You Save: $14.64 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 6 Cyl 3.6L
View related parts
Chevrolet Malibu Sensor Assembly, Crankshaft Position
Part Number: 12674702
$41.87 MSRP: $86.94
You Save: $45.07 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Cr/Shf Posn
- Replaces: 12627185, 12632872
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2022 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Sensor,Crankshaft Position
Part Number: 12613030
$34.68 MSRP: $65.45
You Save: $30.77 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor)
- Replaces: 12590991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 6 Cyl 3.6L
View related parts
Chevrolet Malibu Sensor,Knock
Part Number: 10456287
$26.49 MSRP: $85.22
You Save: $58.73 (69%)
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Control Module, ESC Sensor, Knock Sensor, Sensor
- Replaces: 10456017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Chevrolet Malibu | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 8 Cyl 4.4L, 8 Cyl 5.0L
View related parts
Chevrolet Malibu Sensor Assembly, Crankshaft Position <Use 12F 37
Part Number: 12574323
$39.93 MSRP: $82.89
You Save: $42.96 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 6 Cyl 3.5L
View related parts
Chevrolet Malibu SENSOR ASM-CR/SHF POSN
Part Number: 25203317
$13.00 MSRP: $24.52
You Save: $11.52 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor, Crankshaft Sensor
- Replaced by: 25207127
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L
View related parts
Chevrolet Malibu Sensor Assembly, Crankshaft Position <Use 12F 37
Part Number: 12598208
$23.29 MSRP: $43.94
You Save: $20.65 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor)
- Replaces: 12591007
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, 4 DOOR NOTCHBACK, BASE 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Sensor Assembly, Crankshaft Position
Part Number: 55492970
$31.08 MSRP: $58.64
You Save: $27.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Malibu | LT HYBRID 4 DOOR NOTCHBACK | 4 Cyl 1.8L

Chevrolet Malibu Crankshaft Position Sensor

The Crankshaft Position Sensor in Chevrolet Malibu cars is definitely an essential electronic control gadget utilized to measure the place of the crankshaft shrewd in addition to its rate of rotation. This sensor sends information to the powertrain control module so that there can be better control of ignition time and the injections of fuel for the engine's efficiency. Chevrolet Malibu has applied Crankshaft Position Sensors of inductive, Hall Effect, magnetoresistive, and optical types in the course of years. Inductive sensors are non-active whereas Hall and magnetoresistive sensors are capable of detecting static magnetic fields only. Optical sensors deliver high edge accuracy but contain fouling degradation factors. The primary function of Crankshaft Position Sensor is to optimize the administration of the engine and if there is anything that goes wrong in this component, then problems such as poor starting and issues in the performance of the engine are bound to occur.

Each OEM Chevrolet Malibu Crankshaft Position Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Malibu Crankshaft Position Sensor Parts Questions & Experts Answers

Sensor Assembly, Crankshaft Position
12674702
Q: What should you do if the Malfunction Indicator Light (MIL) comes on after replacing the CKP sensor and starting the engine on Chevrolet Malibu?
A: If the Malfunction Indicator Light (MIL) comes on after replacing the CKP sensor and starting the engine, drive the vehicle to a dealer or qualified repair shop to have the crankshaft position variation learn procedure performed with a factory scan tool. On 1.5L engines, the CKP sensor is located in the engine block near the flywheel, facing the rear of the vehicle, while on 2.0L and 2.5L engines, it is also located in the engine block near the flywheel, facing the rear, but behind the starter. Begin by raising and supporting the front of the vehicle on jackstands. For 2.0L and 2.5L engines, remove the starter to access the CKP sensor. Disconnect the CKP electrical connector on all models, then remove the CKP sensor mounting bolt and take out the sensor. Inspect the O-ring and replace it if damaged. Installation is the reverse of removal; lubricate the O-ring with a film of clean engine oil and securely tighten the sensor bolt.

Related Chevrolet Malibu Parts

Browse by Year