Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2002 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 8 Cyl 6.5L Diesel
Other Name: Module Kit,Fuel Tank Fuel Pump (W/O Fuel Level Sensor); Fuel Pump
Replaced by: 19420757
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2010-2016 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON PASSENGER, 1/2 TON CARGO EXPRESS, 1/2 TON CARGO SAVANA, 1/2 TON PASSENGER EXPRESS, 1/2 TON PASSENGER SAVANA, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA | 6 Cyl 4.3L, 8 Cyl 4.8L Flex, 8 Cyl 6.0L Flex
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-1998 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 8 Cyl 6.5L Diesel
Other Name: Pump Assembly, Fuel; Filler Neck, Fuel Pump
Replaced by: 12733993
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2021 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 6 Cyl 4.3L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2021 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 6 Cyl 4.3L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2016 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS | 8 Cyl 6.6L Diesel
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2012-2016 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 8 Cyl 6.6L Diesel
| Page 1 of 4 |Next >
1-20 of 68 Results
Chevrolet Express Fuel Pump Parts Questions & Experts Answers
Q: How to check the fuel pump in Chevrolet Express?
A: The fuel pump is located inside the fuel tank, making it difficult to hear when the engine is running. To perform a pressure check, use a fuel pressure gauge with a hose and an adapter suitable for connecting it to the test port on the fuel feed line. Start the engine and check the pressure on the gauge and if the pressure is not within specifications, you should check for obstructions in the fuel return line.
Q: How do you remove the fuel pump/fuel level sending unit module?
A: To remove the fuel pump/fuel level sensor, start by relieving the fuel system pressure and disconnecting the cable from the negative battery terminal. Then, raise the vehicle and secure it on jackstands before removing the Fuel Tank. Clean the area around the fuel pump/fuel level sensor to prevent dirt from entering the tank. Disconnect the electrical connectors and fuel lines from the unit and unscrew the lockring using pliers.
Q: How do you replace the fuel tank and fuel pump/fuel level sending unit on Chevrolet Express?
A: Remove the Fuel Tank and the fuel pump/ fuel level sensor. Disconnect the fuel level sensor electrical connector from the fuel pump/fuel level sensor cover. On 2011 and later models, remove the fuel level sensor unit from the fuel pump module. Installation is the reverse of removal.
Q: How to remove and install the engine covers, fuel rail fuel pressure sensor, and high-pressure fuel pump for Chevrolet Express?
A: To remove the engine covers, relieve the fuel system pressure, and disconnect the cable from the negative battery terminal. Then, remove the intake manifold and the fuel pump/fuel rail insulator. For the fuel rail fuel pressure sensor, disconnect the electrical connector and unscrew the sensor from the end of the fuel rail. Clean the threads and apply oil to the new sensor before installing it. Tighten the sensor to the proper torque specifications and reconnect the electrical connector. The installation process is the reverse of removal. To remove the high-pressure fuel pump, disconnect the low-pressure feed line and unscrew the high-pressure line fittings. Disconnect the electrical connector and remove the pump bolts, cover, and gasket. Replace the bolts and gasket with new ones. Ensure the camshaft lobe is at its base circle before installing the pump and lubricate the pump roller with engine oil. The installation process is the reverse of removal. Clean the high-pressure fuel line fittings, apply oil to the threads, and install the new high-pressure fuel line. Finally, reconnect the cable to the negative battery terminal, start the engine, and check for fuel leaks.