How do you disconnect and replace the ignition switch and key lock cylinder on Chevrolet Camaro?

Disconnect the cable from the negative terminal of the battery. Remove the knee bolster trim panel, the knee bolster, and the upper and lower steering column covers, then lower the steering column to its lowest position. Remove the locking pin and disconnect the electrical connector from the ignition switch by depressing the red locking pin. Take out the ignition switch mounting fasteners and the ignition switch from the steering column, ensuring that the new switch snaps into place during installation, which follows the reverse of removal. Turn the ignition key to the RUN position and use a suitable tool to depress the Ignition Lock Cylinder release button located at the top, then remove the Ignition Lock Cylinder. For installation, insert the Ignition Lock Cylinder into the housing and push it in until it clicks. If replacing, ensure it is properly coded to match the original by a dealer service department. Verify that the ignition switch operates correctly in the OFF, ACC, RUN, and START positions, with installation following the reverse of removal. Removal of the lock cylinder illumination ring is not necessary for lock cylinder replacement; however, disconnect the electrical connector from the illumination ring, disengage the lock tabs, and remove the illumination ring, ensuring that it snaps into place during installation.

Genuine Chevrolet Camaro Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ignition Lock Cylinders found

View related parts
Chevrolet Camaro Cylinder,Steering Column Lock & Ignition Switch
Part Number: 26033390
$62.42 MSRP: $103.20
You Save: $40.78 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-2002 Chevrolet Camaro | 2 DOOR, 4 DOOR, CONVERTIBLE, RS 2 DOOR, RS CONVERTIBLE | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Camaro Cylinder Kit,Ignition Lock (Uncoded)
Part Number: 20766607
$30.01 MSRP: $56.62
You Save: $26.61 (47%)
ADD TO CART
Product Specifications
- Other Name: CYLINDER KIT, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Camaro CYLINDER ASM,IGN LK
Part Number: 19356477
$28.29 MSRP: $42.29
You Save: $14.00 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 07830380, 7830380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Chevrolet Camaro | 2 DOOR, 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L, 8 Cyl 5.0L
View related parts
Chevrolet Camaro Cylinder Set,Steering Column Lock & Ignition Switch
Part Number: 26033387
$71.70 MSRP: $192.24
You Save: $120.54 (63%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2002 Chevrolet Camaro | 2 DOOR, CONVERTIBLE, RS 2 DOOR, RS CONVERTIBLE | 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Camaro Cylinder,Steering Column Lock & Ignition Switch
Part Number: 26030242
Product Specifications
- Other Name: CYLINDER, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Camaro | 2 DOOR, CONVERTIBLE | 6 Cyl 3.8L, 8 Cyl 5.7L
- 1993 Chevrolet Camaro | 2 DOOR, CONVERTIBLE | 6 Cyl 3.4L, 8 Cyl 5.7L

Chevrolet Camaro Ignition Lock Cylinder

Chevrolet Camaro Ignition Lock Cylinder plays a central function when it comes to starting the car engine and also for immobilization of the automobile. This cylindrical tumbler usually found on the steering column right behind the steering wheel can be started with the right key. Even today most advanced cars use keyless systems, however, Chevrolet Camaro is implemented with this unique system which makes it possible for the car to start only with the help of the key. In the different years of production, there have been different versions of the Ignition Lock Cylinder adopted in Chevrolet Camaro to improve on security and flexibility. Looseness or interference problems within the Ignition Lock Cylinder are some of the main difficulties key has when to be inserted, removed or be turned in order to start the car. In essence, early repair utilizing high quality replacement components are critical in keeping functionality of the ignition system of Chevrolet Camaro vehicles.

Each OEM Chevrolet Camaro Ignition Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Camaro Ignition Lock Cylinder Parts Questions & Experts Answers

Cylinder Kit,Ignition Lock (Uncoded)
20766607
Q: How do you disconnect and replace the ignition switch and key lock cylinder on Chevrolet Camaro?
A: Disconnect the cable from the negative terminal of the battery. Remove the knee bolster trim panel, the knee bolster, and the upper and lower steering column covers, then lower the steering column to its lowest position. Remove the locking pin and disconnect the electrical connector from the ignition switch by depressing the red locking pin. Take out the ignition switch mounting fasteners and the ignition switch from the steering column, ensuring that the new switch snaps into place during installation, which follows the reverse of removal. Turn the ignition key to the RUN position and use a suitable tool to depress the Ignition Lock Cylinder release button located at the top, then remove the Ignition Lock Cylinder. For installation, insert the Ignition Lock Cylinder into the housing and push it in until it clicks. If replacing, ensure it is properly coded to match the original by a dealer service department. Verify that the ignition switch operates correctly in the OFF, ACC, RUN, and START positions, with installation following the reverse of removal. Removal of the lock cylinder illumination ring is not necessary for lock cylinder replacement; however, disconnect the electrical connector from the illumination ring, disengage the lock tabs, and remove the illumination ring, ensuring that it snaps into place during installation.