How to Remove and Install Steering Gear on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove the rack and pinion on models with rack and pinion steering, first loosen the front wheel lug nuts, raise the vehicle, and remove the wheels. Remove the under-vehicle splash shield and the stabilizer bar. Mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft and remove the pinch bolt. Detach the tie-rod ends and the power steering pressure and return lines from the rack and pinion. Lower the rack and pinion from the vehicle. To install, reverse the removal steps and tighten all fasteners to torque specifications. Check the power steering fluid level and bleed the system. For models with recirculating ball Rack And Pinion, raise the vehicle and remove the under-vehicle splash shield and skid plate. Mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft and remove the pinch bolt. Unscrew the power steering lines and separate the relay rod from the Pitman arm. Remove the rack and pinion retaining bolts and detach the rack and pinion from the frame. To install, reverse the removal steps and tighten all fasteners to torque specifications. Check the power steering fluid level and bleed the system.

Genuine Chevrolet Avalanche Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Rack And Pinions found

View related parts
Chevrolet Avalanche GEAR ASM,HYD RECRG BALL STRG
Part Number: 19434141
$621.71 MSRP: $878.14
You Save: $256.43 (30%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 19153560, 19330624, 19167447
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 3/4 TON | 8 Cyl 8.1L
View related parts
Chevrolet Avalanche Gear Kit,Steering (Remanufacture)
Part Number: 19330495
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26106950, 26102452, 88965542, 88965541
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex
View related parts
Chevrolet Avalanche Rack Kit, Piston & Nut Assembly
Part Number: 7817529
Product Specifications
- Other Name: RACK KIT, Steering Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 3/4 TON | 8 Cyl 8.1L
View related parts
Chevrolet Avalanche GEAR KIT,STRG (REMAN)
Part Number: 19434137
$608.66 MSRP: $961.34
You Save: $352.68 (37%)
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 19153072, 19207492, 15254062, 19179828, 19330565
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L
View related parts
Chevrolet Avalanche Gear Kit,Steering (Remanufacture)
Part Number: 19330490
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26102454, 26110836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex

Chevrolet Avalanche Rack And Pinion

The Chevrolet Avalanche Rack And Pinion is one of the vital parts that take the rotational movement of the steering wheel and convert it to the side movement of the front wheels. This assembly is called rack and pinion; it involves gears installed in an encased metal tube which is affixed to the frame work of the car and the shaft of the steering wheel connects to the pinion gear. Most contemporary cars, including the Avalanche, feature power assisted rack and pinion steering where a hydraulic system assists in moving the rack, enclosed in the tube, laterally for improved steering. Hydraulic power rack and pinion used in Chevrolet Avalanche have some problems such as leaking due to decline O-ring seal or a worn power steering hoses. Signs of a faulty steering rack include; stiff steering, grinding, wandering, or pulling to the side. Sometimes, due to wear and tear of the gear, it might be required to replace the rack and pinion gears to ensure that the steering of the automobile is working adequately. However, these drawbacks do not erase the usefulness of the rack and pinion steering mechanisms since they are used in providing the required and specific steering feel in vehicles such as the Chevrolet Avalanche.

Each OEM Chevrolet Avalanche Rack And Pinion we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Avalanche Rack And Pinion Parts Questions & Experts Answers

Gear Kit,Steering (Remanufacture)
19330565
Q: How to Remove and Install Steering Gear on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the rack and pinion on models with rack and pinion steering, first loosen the front wheel lug nuts, raise the vehicle, and remove the wheels. Remove the under-vehicle splash shield and the stabilizer bar. Mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft and remove the pinch bolt. Detach the tie-rod ends and the power steering pressure and return lines from the rack and pinion. Lower the rack and pinion from the vehicle. To install, reverse the removal steps and tighten all fasteners to torque specifications. Check the power steering fluid level and bleed the system. For models with recirculating ball Rack And Pinion, raise the vehicle and remove the under-vehicle splash shield and skid plate. Mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft and remove the pinch bolt. Unscrew the power steering lines and separate the relay rod from the Pitman Arm. Remove the rack and pinion retaining bolts and detach the rack and pinion from the frame. To install, reverse the removal steps and tighten all fasteners to torque specifications. Check the power steering fluid level and bleed the system.