Other Name: Sensor Assembly, A/C Refrigerant Pressure
Replaces: 13502759, 22634172, 13502758, 22678731
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2011-2020 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SL 4 DOOR STATION WAGON, 1SX 4 DOOR HATCHBACK, BASE 4 DOOR HATCHBACK, BASE 4 DOOR STATION WAGON, CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 3.6L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2018-2020 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SL 4 DOOR STATION WAGON, 1SX 4 DOOR HATCHBACK, BASE 4 DOOR HATCHBACK, BASE 4 DOOR STATION WAGON | 4 Cyl 2.0L, 6 Cyl 3.6L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2011-2020 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SL 4 DOOR STATION WAGON, 1SX 4 DOOR HATCHBACK, BASE 4 DOOR HATCHBACK, BASE 4 DOOR STATION WAGON, CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 3.6L
Other Name: VALVE, A/C Compressor; Liquid Line Valve, Pressure Hose Valve
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2011-2013 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
| Page 1 of 2 |Next >
1-20 of 28 Results
Buick Regal HVAC Pressure Switch
Each OEM Buick Regal HVAC Pressure Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Buick Regal HVAC Pressure Switch Parts Questions & Experts Answers
Q: What is the Pressure Cycling Switch on Buick Regal?
A: The pressure cycling switch controls the refrigeration cycle by sensing low-side pressure as an indicator of evaporator temperature. To remove the switch, disconnect the negative Battery Cable, unplug the electrical connector, and remove the switch and O-ring seal. To begin the installation, begin by putting in a new O-ring, lubricating it with refrigerant oil, and installing the switch. Engage the electrical connector, and connect the negative battery cable. Reset the radio, clock, and any other applicable electronic devices.