How do you remove and install the cooling fan assembly?

To remove the front bumper cover and hood latch, detach any electrical connectors from the bumper support and remove the front bumper impact absorber. Then, remove the two radiator upper mounting brackets and tilt the radiator and condenser forward for additional access. Disconnect the Radiator fan electrical connectors and remove the two fan shroud-to-radiator bolts and fasteners. Lift the radiator fan assembly from the lower radiator mounts and out of the engine compartment. To detach the fan motor from the shroud, remove the screws. To detach the fan blade from the motor, remove the motor shaft clip or bolt, depending on the design. For installation, simply reverse the steps of removal. Finally, run the engine to normal operating temperature and operate the air conditioning to ensure the radiator fans operate properly.

Genuine Buick Enclave Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Radiator fans found

View related parts
Buick Enclave Fan Assembly, Engine Cooler
Part Number: 23434158
$379.21 MSRP: $796.65
You Save: $417.44 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Eng Clr; Fan Assembly, Fan Shroud
- Replaces: 25927026, 15226663, 20972760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Buick Enclave Fan Assembly, Eng Clr
Part Number: 84725046
$251.38 MSRP: $528.13
You Save: $276.75 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: 84199038
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Fan Assembly, Eng Clr
Part Number: 84725045
$268.45 MSRP: $563.98
You Save: $295.53 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: 84199039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Fan Assembly, Eng Clr
Part Number: 85151154
$211.44 MSRP: $444.22
You Save: $232.78 (53%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: 84980928, 84861223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Fan Assembly, Eng Clr
Part Number: 85151156
$246.75 MSRP: $518.38
You Save: $271.63 (53%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: 84861224, 84980929
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave FAN ASM-ENG CLR
Part Number: 86579042
$242.99 MSRP: $437.82
You Save: $194.83 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L

Buick Enclave Radiator fan

The Radiator Fan in the Buick Enclave automotive is significant in maintaining the temperature of the vehicle's engine most especially on a idle or low speed running car. It prevents excessive accumulation of air in the radiator which has a primary role of cooling the engine's coolant before it is pumped into the engine again. The Enclave has both mechanical and electrical cooling fans; new cars use electric fans operated by a 12V motor. The electric fans in these applications are controlled by coolant temperature and air conditioning requirements for premier operation. In many cases, such as theRx2 rally car, the mechanical fans, which are usually fitted on the water pump shaft, are switched on and off by a thermal clutch so as to avoid wastage of fuel and produce less noise when the car is moving at higher speeds. This is why the design of the fan assembly, as well as theshroud, is crucial for direction of the airflow- and because of this, the Radiator Fan is a key component for the continual performance and efficacies of Buick Enclave vehicles.

Each OEM Buick Enclave Radiator fan we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Enclave Radiator fan Parts Questions & Experts Answers

Fan Assembly, Engine Cooler
23434158
Q: How do you remove and install the cooling fan assembly?
A: To remove the front bumper cover and hood latch, detach any electrical connectors from the bumper support and remove the front bumper impact absorber. Then, remove the two Radiator upper mounting brackets and tilt the radiator and condenser forward for additional access. Disconnect the Radiator fan electrical connectors and remove the two fan shroud-to-radiator bolts and fasteners. Lift the radiator fan assembly from the lower radiator mounts and out of the engine compartment. To detach the fan motor from the shroud, remove the screws. To detach the fan blade from the motor, remove the motor shaft clip or bolt, depending on the design. For installation, simply reverse the steps of removal. Finally, run the engine to normal operating temperature and operate the air conditioning to ensure the radiator fans operate properly.