How do you remove the water pump for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?

To remove the water pump, start by disconnecting the cable from the negative battery terminal and draining the cooling system. Remove the drivebelt, right-side engine strut mount, and mount bracket. Hold the water pump pulley with a strap wrench or pin spanner and remove the pulley mounting bolts and pulley. Then, remove the water pump mounting bolts and carefully remove the pump from the engine. Clean the mating surface of the engine and the water pump if it will be reinstalled. To install the new water pump, compare it with the old one to ensure they are identical. Place the gasket and water pump into position and install the new mounting bolts. Tighten the water pump mounting bolts in a criss-cross pattern to the specified torque. Finally, tighten the water pump pulley bolts, refill the cooling system with the proper antifreeze concentration, and start the engine to check for leaks while it reaches normal operating temperature.

Genuine Buick Enclave Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

View related parts
Buick Enclave Pump Assembly, Aux Wat
Part Number: 13546434
$62.41 MSRP: $111.94
You Save: $49.53 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Auxiliary Pump
- Replaced by: 13551861
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Pump Kit, Wat
Part Number: 12709178
$196.97 MSRP: $354.90
You Save: $157.93 (45%)
Ships in 1-3 Business Days
Product Specifications
- Other Name: Water Pump, Water Pump Assembly
- Replaces: 12645176, 12637479, 12618472, 12657499
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV, SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Buick Enclave Water Pump

The Water Pump in Buick Enclave automobiles is important in circulating the coolant from the radiator to the engine to given new heat, which has been produced through combustion. The Enclave models are equipped with a belt-driven water pump having an impeller that circulates coolant through the engine block and out to the radiator. Of course, previous models, for example, cast iron water pumps may be used earlier but current models have aluminum materials to increase efficiency. The signs that are indicative of a water pump in its early stages of failure are, leakage of the coolant, a squealing, or a plopping noise due to the condition of the bearings, and of course over-heating engines. Premium engines can benefit highly from reconstructing the water pump for a higher coolant flow and evacuation, such performance parts include modified cast iron pumps taken from the OEM engines or custom made aluminum designs. There are also electric water pumps developed for higher efficiency and to manage the cooling more effectively, mostly for standard applications where space is quite constrained.

Each OEM Buick Enclave Water Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Enclave Water Pump Parts Questions & Experts Answers

Engine Coolant Pump Kit
12657499
Q: How do you remove the water pump for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?
A: To remove the water pump, start by disconnecting the cable from the negative battery terminal and draining the cooling system. Remove the drivebelt, right-side engine strut mount, and mount bracket. Hold the water pump pulley with a strap wrench or pin spanner and remove the pulley mounting bolts and pulley. Then, remove the water pump mounting bolts and carefully remove the pump from the engine. Clean the mating surface of the engine and the water pump if it will be reinstalled. To install the new water pump, compare it with the old one to ensure they are identical. Place the gasket and water pump into position and install the new mounting bolts. Tighten the water pump mounting bolts in a criss-cross pattern to the specified torque. Finally, tighten the water pump pulley bolts, refill the cooling system with the proper antifreeze concentration, and start the engine to check for leaks while it reaches normal operating temperature.