My Garage
My Account
Cart
Genuine Buick Century Sway Bar Kit
Stabilizer Sway Bar Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
11 Sway Bar Kits found
Buick Century Shaft, Front Stabilizer *Pink
Part Number: 25861196$106.52 MSRP: $167.58You Save: $61.06 (37%)Ships in 1-3 Business Days
Buick Century Shaft, Rear Stabilizer
Part Number: 10274736$74.73 MSRP: $173.89You Save: $99.16 (58%)Ships in 1-2 Business Days
Buick Century Shaft, Front Stabilizer
Part Number: 10284146$54.60 MSRP: $85.91You Save: $31.31 (37%)Ships in 1-3 Business Days
Buick Century Shaft, Rear Stabilizer
Part Number: 10243923$93.26 MSRP: $146.75You Save: $53.49 (37%)Ships in 1-2 Business Days
Buick Century Shaft,Front Stabilizer
Part Number: 14093241$90.84 MSRP: $152.64You Save: $61.80 (41%)Ships in 1-2 Business Days
Buick Century Sway Bar Kit
The Sway Bar Kit which is installed in Buick Century cars plays a significant part in improvement of the vehicle stability and handling as it reduces the body roll during cornering as well as during movement over irregular terrains. This anti roll bar links opposite wheels and uses a torsion spring which helps in increasing the roll stiffness without changing the vertical spring rate. Since it ensures that the two wheels are at the same height, the Sway Bar Kit discourages sideways tilt thus increasing the level of traction. In the Buick Century models, different kinds of Sway Bar Kit have been used based on different model years, where adjustments on stiffness level are possible via adjustable or active Sway Bar Kits. Such advanced designs which are mostly implemented on modern cars can improve handling by adjusting to conditions on the road in real time. Not only does the Sway Bar Kit greatly improve handling capabilities, it also transfers movement from one wheel to the other potentially causing the "waddling" effect when off-road. In general, the role of the Sway Bar Kit is to provide a proper distribution of the torque load created by turning of the car and, thus, have a positive impact on the Buick Century's handling.
Each OEM Buick Century Sway Bar Kit we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Buick Century Sway Bar Kit Parts Questions & Experts Answers
- Q: How do you remove and install the front stabilizer bar on Buick Century?A: To replace the Sway Bar Kit one has to lift the vehicle and support it using jack stands. For all the nuts, washers, spacers, and bushings used, one should make a note of the order of assembly that they are to be used in. The procedure should start with the detachment of the nut topping the connecting link together with the washers and rubber bushings also arranged in a proper manner. Do this for the other side as well. Thereafter, unfasten the two bolts on each side that bring together the Sway Bar Kit bracket and the frame and finally, do away with each of them together with the Sway Bar Kit but make sure you don't lose any part because these brackets are made in two halves. Clean the bushings which are restrained on bolts in pairs as well as those which connect the Sway Bar Kit to the frame mounts and, if they are cracked or torn or have become hard and brittle, replace them. Also check the washer and spacers; if they are worn or damaged, they should also be replaced. If the Sway Bar Kit link bolt or the bushings are damaged, tighten the mounting nut from below by using the help of a socket and angle drive to pull out the bolt and fit any spoilt part. For installation, remove the Sway Bar Kit and assemble the parts in the reverse manner with great care to ensure that the bushings fit well in the frame brackets with their slits facing forward of the car. Last of all, use a wrench to tighten the locknut on the Sway Bar Kit link to 13 ft. lbs. and the bracket bolts to 25 ft. lbs. (34 Nm).
Related Buick Century Parts
Buick Century Steering Wheel
Buick Century Steering Column
Buick Century Sway Bar Link
Buick Century Sway Bar Bushing
Buick Century Sway Bar Bracket
Browse by Year
2005 Sway Bar Kit 2004 Sway Bar Kit 2003 Sway Bar Kit 2002 Sway Bar Kit 2001 Sway Bar Kit 2000 Sway Bar Kit 1999 Sway Bar Kit 1998 Sway Bar Kit 1997 Sway Bar Kit 1996 Sway Bar Kit 1995 Sway Bar Kit 1994 Sway Bar Kit 1993 Sway Bar Kit 1992 Sway Bar Kit 1991 Sway Bar Kit 1990 Sway Bar Kit 1989 Sway Bar Kit 1988 Sway Bar Kit 1987 Sway Bar Kit 1986 Sway Bar Kit 1985 Sway Bar Kit 1984 Sway Bar Kit 1983 Sway Bar Kit 1982 Sway Bar Kit