Saturn 12577984 Cylinder Asm,Clutch Master

You can Select Your Vehicle to check if 12577984 fits your vehicle.

On the car, there are few steps that need to be followed to remove the clutch master cylinder which includes, Disconnect the pushrod from the pedal and this is done when the worker is underneath the dashboard. Put rags beneath the cylinder and in case the model has a common brake fluid supply, clamp off the clutch fluid supply line before disconnecting it from the master cylinder. Subsequently, it is necessary to put more rags beneath the master cylinder and unscrew the pressure line with the help of a clamp by means of a small pick; then the line should be pulled with force and the open end of the line should be sealed. Lose the mounting nuts to separate the cylinder and the firewall, and in some cases you also have to pull the separate reservoir out of its place along with the master cylinder. For installation, first secure the position of the master cylinder on the firewall then fit the nuts and in the case where the reservoir is separated the slide it into the bracket. Tighten the mounting nuts, take the pressure line fitting connecting to the master cylinder, and apply the feed hose in case both models use the same brake fluid reservoir. Last but not the least connect the pushrod to the clutch pedal and replenish the reservoir with brake fluid that is of DOT 3 standard and then bleed the clutch system.